Digizz
Established Member
I've finished my fish tank cabinet but now need to cut a hole in the side to fit a fan. The material is veneered MDF 19mm thick and the hole has to be regular and clean. Hole diameter is approx 120mm.
I'm not sure of the best method to cut this hole that will not damage the rest of the cabinet panel and not tear out any of the veneer. The main difficulty with using a router etc is that it would be pretty difficult to turn the cabinet on its end to have a flat surface to rest a router on.
any ideas?
Thanks, Paul.
I'm not sure of the best method to cut this hole that will not damage the rest of the cabinet panel and not tear out any of the veneer. The main difficulty with using a router etc is that it would be pretty difficult to turn the cabinet on its end to have a flat surface to rest a router on.
any ideas?
Thanks, Paul.