Copy Lathe

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

JFC

Established Member
Joined
30 Sep 2005
Messages
2,180
Reaction score
0
Location
London
Does anybody know of a cheap and cheerful copy lathe if there is such a thing ? I need to copy about 10 spindles and i would need to invest in alot of cutters to do them on the Legacy :D . OR is there some kind of attachment with a pin at one end and a cutter on the other that can fit on any lathe ? Thanks , Jason .
 
I was going to but it didnt seem like there was alot going on in there :shock:
 
:D B&Q have one at £199 not to sure how good it is i,m no expert on lathes one the others should be able to guide you better :D

martyn
 
Martyn2 I saw that on previous posts but it only has a stock length of 1m if i buy one i want at least 1.2m so i can copy newel posts too . I was thinking about 3 -500 quid will get me what i need for the one off job and i get to buy a new :tool:
 

Latest posts

Back
Top