• If you have bought, sold or gained information from our Classifieds, please donate to UK Workshop and give back.

    You can become a Supporting Member or just click here to donate.

Sold Bosch GTS10XC Table Saw

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Dr Al

Established Member
Joined
11 May 2020
Messages
353
Reaction score
774
Location
Dursley, Gloucestershire
As per title, a Bosch GTS10XC Table Saw with all the bits and bobs it came with (including the manual) and a few extras for good measure.

These are £660 new (not including all the extra saw blades); I'm looking for £450 ovno (collected from Gloucestershire).

1657897026102.png


1657897038934.png


1657897058544.png


1657897068878.png


1657897081688.png


As you can see in the last photo above, the slide-locking screw for the mitre thingy has been replaced with a brass screw as the original was lost. The photo also shows an MDF "zero-clearance" insert. It's quite old and shabby but could be used as a template for a new one. The original insert is also included in the sale.

The fence has had the (arguably essential) upgrade to replace the guide pieces with larger 3D printed ones and to add a bearing on the back edge. I've still got the original parts if you want to revert for some strange reason:


1657897203839.png



1657897225610.png


Comes with a selection of different blades and various push sticks etc:

1657897269832.png




Optionally (but for free), also comes with my cross-cut sled (this is an old photo: the sled looks a bit shabbier now but still works as well). If you don't want it, I'll take it apart and use the plywood.

1657897399737.png


Also optionally, comes with my slightly unusual trolley, which was made to make it relatively straightforward to put it side-on into my shed. I'll completely understand if you don't want this (it is a bit special-purpose after all!) and if you don't, I'll take the castors off and take the rest to the tip!

1657897518842.png


Also listed on the MIG welding forum & on gumtree
 
Last edited:
Back
Top