Birch Ply price

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

TheTiddles

Established Member
Joined
14 Oct 2007
Messages
3,023
Reaction score
837
Location
Wiltshire
A perennial question...

How much per 18mm sheet? I see most people are up in the £70+vat range, is this now the usual unless you buy in bulk?

Aidan
 
What do you mean by bulk? I ordered 8 sheets today and I think the price was around £37 + VAT. That will be latvian (better than russian) but may well have some patches where knots in the face veneer have been removed.
 
I bought a couple of sheets of 6mm this morning for £25.10 plus VAT each - The 9mm I bought the other week was £28.20 plus VAt each from a timber suppliers just up the raod from me.

Rog
 
Wow, prices of this have crept up loads since I last looked (few years now). Shame we havent got any 28mm sheets left at work (russian birch with the odd 'dutchman' (a Normism??) in the face), I'd ebay them £££££ :)
 
Ok, so Latvian is ok for veneered work?

I've been quoted £68 inc.VAT from my local supplier, which is ok I think. Seems theprice goes up dramatically once you go over 9mm

Aidan
 
Where I work we get malasyian / Chinese ply. Some of it is good quality, some poor, but most is fairly decent. Cost price for a sheet of 12mm ply is about £15.
 
I pay about £35/£40 for 18mm lat ply from Meyer timber, probably the same place as Dodge? Its OK for carcasing, but has some patches and the odd bit of colour, so I don't use it for face work. But you can get the good stuff, perhaps you have been quoted for that? But it seems cheap for that, so I think you should ring round a few suppliers as you have been quoted high IMHO.
 
B & Q sell 2440 x 1220 x 18mm sheets of Temperate Hardwood ply for £59.99 at the moment.

They used to provide a cutting service too. Not sure if this is still the case though.

Oz
 
Totton Timber want £62.83 delivered and I expect that will include your area.
They are generally high price but good quality.
They quote Latvian/European so I don't know if you have any choice as to which.

Bob
 
If you have a Jewson's near you, have a look at their 'WISA-Twin Plywood' it's as good as Birch ply, not as heavy and quite a lot cheaper if you can get it at trade price.
 
Back
Top