Bill Pentz's Cyclone

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I found a source of the cyclone filters in the UK (see below) but they will only deal with the trade and the filters cost £128 +VAT + shipping
Does anybody on the list deal with them and can get them cheaper as they are about $80 in the USA
Thanks



Donaldson
0116 2564268 fax
0116 2564335
Neil Upton
£128

ULTRA-WEB FR CARTRIDGE UK code 262-5015/USA code P527080-461-436

Ultra-Web Flame Retardant Cartridge with nanofiber technology for Downflo (2.0-inch pleat).


Industrial Air Filters & Hardware Product Attributes
Current Brand: Donaldson Torit
Former Brand: Torit
Media Type: Cellulose
Flame Retardant: Yes
Filter Area (sq ft): 226
Filter Area (sq m): 21.0
Pleat Height (inches): 2.0
Pleat Height (mm): 50.8
Outer Diameter (inches): 12.75Outer Diameter (mm): 323.9
Length (inches): 26
Length (mm): 660.4
Temperature Limit (F): 150
Temperature Limit (C): 65
Gasket Material: Urethane
End Cap Material: Galvanized Steel
Shape: Round
 
I have bitten the bullet and ordered the galvanized sheeting although I have not found an impellor. The Jet impellor from Bill's site is not supplied in the UK. Most of the suppliers of extractors in the UK do not have impellors as spares. Anybody know of an existing extractor that has a 14"(350mm) impellor. Charnwood are trying to source one but have had no luck so far.
Thanks
 
Back
Top