Chrispy Established Member Joined 10 Aug 2011 Messages 1,981 Reaction score 183 Location Oxfordshire 10 Sep 2013 #1 Can some one please help me, What is the belt length for a Coronet No 1 lathe I know it is TEA poly-v 180J4 but not sure of the length.
Can some one please help me, What is the belt length for a Coronet No 1 lathe I know it is TEA poly-v 180J4 but not sure of the length.
D Doofusme Established Member Joined 6 Mar 2013 Messages 158 Reaction score 0 Location Aston Clinton 10 Sep 2013 #2 18" Nominal Outside Length Google is your friend http://www.amazon.com/Goodyear-Engineer ... B004ELAEDE regards Phil
18" Nominal Outside Length Google is your friend http://www.amazon.com/Goodyear-Engineer ... B004ELAEDE regards Phil
Chrispy Established Member Joined 10 Aug 2011 Messages 1,981 Reaction score 183 Location Oxfordshire 10 Sep 2013 #3 Ah that's how it works, inches! Thanks.
CHJ Established Member Joined 31 Dec 2004 Messages 20,132 Reaction score 80 Location Cotswolds UK 10 Sep 2013 #4 Inches-yes if they are USA supply and spec. Just be careful with EU/metric specified belt listings and USA listings. EG: 610J Poly Vee belt in EU (metric) is 610mm long approx. 24 inches long. (Fits a SIP 14" bandsaw.) Gates (USA) 610J is 61.0 inches long, 1549 mm
Inches-yes if they are USA supply and spec. Just be careful with EU/metric specified belt listings and USA listings. EG: 610J Poly Vee belt in EU (metric) is 610mm long approx. 24 inches long. (Fits a SIP 14" bandsaw.) Gates (USA) 610J is 61.0 inches long, 1549 mm
Chrispy Established Member Joined 10 Aug 2011 Messages 1,981 Reaction score 183 Location Oxfordshire 10 Sep 2013 #5 Not much difference there then! :lol: