Quantcast

Bandsaw Box No 3

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

Fiddler

Established Member
Joined
13 Feb 2012
Messages
65
Reaction score
0
Location
Morecambe
After completing my first real woodwork project of a pair of bandsaw boxes I decided to try another more complicated box. So as not to waste any good wood, I picked a handful of 2" x 4" offcuts out of the firewood pile and glued them together. I then cut and sanded the resulting block into a size that would fit my bandsaw, then drew out the two drawer pattern on the front. I tried to avoid small curves and this design pushed my 1/4" blade to the limit of it's turning capacity.

 
Top