bandsaw blades

[mailee]

does anyone know if Dure Edge have a sight on the internet? I need some new blades for mine and can't find the address.

 

[Anonymous]

No they don't.

If you do a search on the forum and you will find their telephone number and address

 

[Argee]

Dure-Edge (Sherlock, Limited),
21, Station Road,
Woodley,
Stockport,
SK6 1HN.

Telephone number: 08702 252337 / 0161 430 2647
Fax: 0161 430 8008

Ray

 

[devonwoody]

I used a dureedge new blade yesterday it was a 1/2" blade but has
14 teeth instead of the usual 3 to 6 range.

It made really smooth cuts on some tenon cheeks and shoulders.

Its a pity it takes 10 to 20 minutes to change over blade on a bandsaw

 

[mailee]

Thanks guys, I will give them a call and order a couple. Just bought the bandsaw and it came with a spare blade that was kinked the one in it is buggered too so need some new ones. Thaks again guys.

 

[Dewy]

Its a pity it takes 10 to 20 minutes to change over blade on a bandsaw

That should come down to a minute or two with practice.
Or was I just used to using a Startrite industrial bandsaw with blade welding built in?. :lol: :wink:

 

[devonwoody]

14 teeth to the inch bandsaw blade.

Yesterday I needed a slice (1/4" thick) off some timber to use has a patch to cover a nail hole (second hand timber) the cut was so clean I couldnt tell which side was the sawn or already planed up side.

Just thought I would mention it has in the past using 3 or 6 tooth blades the wood surface looks like a ploughed field.