Quantcast
  • We invite you to join UKWorkshop.
    Members can turn off viewing Ads!

Bandsaw and SCMS advice?

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

Vormulac

Established Member
Joined
10 Oct 2004
Messages
1,217
Reaction score
0
Location
Uxbridge, West London
Hi all,

Quick question, does anyone have experience of either of these pieces of kit by SIP?

10" sliding compound mitre saw (with laser) model 01314
12" bandsaw model 01486

Thank you!

Vormulac.
 
A

Anonymous

Guest
I have an SIP 12" sliding compound mitre saw (with laser) and it is very accurate. I am pleased as punch with it after 8 months of ownership. It did not come with a depth stop though to allow me ot make trenching cuts (they do now) but an 8mm bolt tapped into the casting sorted that out nicely

Mine cut all set angles (90, 45 etc.) spot on from the box and there is no play in the slides which are very sturdy

Very good value for money and a great piece of kit :wink:

My only quibble is the dust extraction outlet. rubbish!!!!!!!


I also have an SIP P/T and am pleased with that too.
 

DaveL

Established Member
Joined
19 Oct 2002
Messages
4,674
Reaction score
0
Location
Sudbury, Suffolk
Tony":1519w4jm said:
My only quibble is the dust extraction outlet. rubbish!!!!!!!
But that seems to be standard for compound sliding mitre saws in general. I plan (when the tuit is found :roll: ) to make a thin ply back to go around my CSMS to contain the dust, connecting the dust extraction system to it low down. 8)
 
Top