Axminster Hobby Series AWHBS250N Bandsaw

[ellisn]

Ok not really a review but a bit of advice.

The saw works great after setting up and enlarging the table insert for a 1/2" blade, so far put some walnut, oak and cherry through it and very clean, but..

The dust extraction point is so close to the base I couldn't attatch mine with adaptor as the main hose is too big so will need to get a longer adaptor to pull the attachment away from the base.

Neil

 

[mqbernardo]

thanks for the tip... i still haven´t come down to dust extraction (i can´t seem to make much dust with this saw), but that might be useful in the future.

 

[ellisn]

I'm suprised how much dust this makes, and it seems to be everywhere. At the moment until I can extend the extraction port past the stand i'm having to hoover up after use.

 

[mqbernardo]

same here, dust extraction is not good.