An unknown tool

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

toolmaniac

Established Member
Joined
16 Dec 2011
Messages
23
Reaction score
0
Location
Ipswich, Suffolk - The Jewel of the East
I got this tool in a mixed box I bought at an auction.

I don't know what it's for, but would guess its an engineer's tool. A stud-remover?

I'm sure somebody out there can tell me.

Stud remover.jpg
 

Attachments

  • Stud remover.jpg
    Stud remover.jpg
    60.6 KB · Views: 1,517
Yup...stud remover...and a variable one too...from one limit to another unlike this one:

DSC_0043.JPG


...recent bootfair find and works brilliantly but only for a fixed 3/8" size...and thereabouts

Jim
 
Some car engine cylinder heads used to be retained by studs and nuts rather that the much more common through bolts. It was best to remove all the studs after the head was off to better clean up the block surface before rebuilding.
 
Can't help but notice your an early riser Roger , I'm just coming towards the end of a 12hr nightshift,I thought I was the one about on here at this time. Lol.
 
thecoder":g58kzkvu said:
Can't help but notice your an early riser Roger , I'm just coming towards the end of a 12hr nightshift,I thought I was the one about on here at this time. Lol.

Yes I'm always up by about 4.30am.

I'm also a radio amateur (ham) and early is the best time to speak with friends around the world. Late evening in the US, teatime in Australia, lunchtime in the middle east .... etc. :)
 
RogerP":uycfqzi6 said:
I'm also a radio amateur (ham) and early is the best time to speak with friends around the world. Late evening in the US, teatime in Australia, lunchtime in the middle east .... etc. :)

I'm intrigued that radio hams still exist, in this era when absolutely any silly person can send a text, email or phone call pretty much anywhere in the world, at any time.

BugBear
 
bugbear":2vjmz6sm said:
I'm intrigued that radio hams still exist, in this era when absolutely any silly person can send a text, email or phone call pretty much anywhere in the world, at any time.
BugBear

Well they can as long as the infrastructure (conceived, built, installed and run by others) is in place.

Why do amateur woodworkers bother making things when it's easier, much quicker and probably cheaper just to buy? Why learn to paint when you can just buy a camera? Why labour for hours in the garden or allotment growing your own fruit and veg when the supermarkets are full of it?

Amateur radio, like many hobbies, is more about the journey than the destination.
 
RogerP":3ojwlb7g said:
bugbear":3ojwlb7g said:
I'm intrigued that radio hams still exist, in this era when absolutely any silly person can send a text, email or phone call pretty much anywhere in the world, at any time.
BugBear

Well they can as long as the infrastructure (conceived, built, installed and run by others) is in place.

Why do amateur woodworkers bother making things when it's easier, much quicker and probably cheaper just to buy? Why learn to paint when you can just buy a camera? Why labour for hours in the garden or allotment growing your own fruit and veg when the supermarkets are full of it?

Amateur radio, like many hobbies, is more about the journey than the destination.

From a former VP8 BGN - well said

Jim
 
jimi43":1x6377hq said:
Yup...stud remover...and a variable one too...from one limit to another unlike this one:

DSC_0043.JPG


...recent bootfair find and works brilliantly but only for a fixed 3/8" size...and thereabouts

Jim
It has the 'Admiralty' arrow on it. Might be associated with Torpedo maintainence, as it looks familiar Jimi,. However, it's a long time ago. I am not sure if the arrow appeared on tools for the RAF and Army too. Probably did.
In the 'Andrew' there was a' penchant' for specialised tools, probably because of the preponederancy of unique designs!!!

Like me! :lol: :lol: :lol:
 
I've understood that arrow to be general MOD John - I have it on two of my most used tools; my savage 4tpi crosscut and my 3 -1/2lb Hardy Pick forging hammer.
 
Indeed you are correct Richard.

In fact, have a shirt and trousers that are covered in such arrows. I 'rescued' them from one of my 'postings', sometime during my service! :lol: :lol: :lol: :mrgreen:

Merry Crimble and enjoy your mince pies!

John :ho2
 
Benchwayze":31qntqof said:
Indeed you are correct Richard.

In fact, have a shirt and trousers that are covered in such arrows. I 'rescued' them from one of my 'postings', sometime during my service! :lol: :lol: :lol: :mrgreen:

Merry Crimble and enjoy your mince pies!

John :ho2

I bet you really got it from Dartmoor John....come on...spill the beans! :mrgreen: :mrgreen: :mrgreen:

Jim
 
jimi43":jz4jhnnm said:
Benchwayze":jz4jhnnm said:
Indeed you are correct Richard.

In fact, have a shirt and trousers that are covered in such arrows. I 'rescued' them from one of my 'postings', sometime during my service! :lol: :lol: :lol: :mrgreen:

Merry Crimble and enjoy your mince pies!

John :ho2

I bet you really got it from Dartmoor John....come on...spill the beans! :mrgreen: :mrgreen: :mrgreen:

Jim

Well Jim,

At least I never need to hire fancy dress now do I? 8) :lol: :lol: :lol:

Happy Chrumbley

John :ho2
 

Latest posts

Back
Top