• If you have bought, sold or gained information from our Classifieds, please donate to UK Workshop and give back.

    You can become a Supporting Member or just click here to donate.

Aluminium pulleys

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Tanglefoot20

Established Member
Joined
28 Dec 2019
Messages
257
Reaction score
76
Location
Yate Bristol
Hello all...
I’m looking for an old /good 3 groove pulley somewhere around 2” 3” 4” with 5/8 bore....and maybe some form of shaft etc...needed for a drive for a lathe project....
Anything similar considered ....

Ta
 
if ur asking for "Stepped pulley's" they are fairly cheap on eBay......
sometimes on car boots u'll get them but mostley they are damaged......
and ull never get the bore u want....
just buy new and get started.....
 
I agree with Frank for the most part. If you can find an import 16 speed drill press for dirt cheap it will have what you need for your lathe. In most cases though by the time you find one and muck about the new options will look better. Local bearing suppliers will have them too.

Pete
 
Back
Top