Quantcast
  • We invite you to join UKWorkshop.
    Members can turn off viewing Ads!

A couple of sightings of note...

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

Alf

Established Member
Joined
22 Oct 2003
Messages
12,079
Reaction score
0
Location
Up the proverbial creek
... from around the forums. Firstly the Mk2 Veritas honing guide in reality here. Alas, no wooden knobs...

Secondly, an interesting L-N prototype spokeshave. Pretty, and presumably actually going to go into production as they've made the toe piece casting.

Cheers, Alf
 
A

Anonymous

Guest
Alf":klcfgcmk said:
... from around the forums. Firstly the Mk2 Veritas honing guide in reality here. Alas, no wooden knobs...
Cheers, Alf
Now that's gotta cost #-o

Thansk Alf :wink:
 

Chris Knight

Established Member
Joined
14 Jan 2004
Messages
6,641
Reaction score
3
Location
SE London - NW Kent
The sharpening guide is a serious looking bit of kit! (I want one )

Another LN shave, low angle this time - I need it!
 

Alf

Established Member
Joined
22 Oct 2003
Messages
12,079
Reaction score
0
Location
Up the proverbial creek
waterhead37":31jjgby6 said:
I need it!
Of course you do, Chris... :^o :roll:

Cheers, Alf

Who needs one as well - obviously. Spokeshaves are like clamps, right? You can never have enough... 8-[
 

Rob Lee

Established Member
Joined
7 Apr 2004
Messages
492
Reaction score
0
Location
Ottawa, Ontario, Canada
Espedair Street":3rxm7f40 said:
Alf":3rxm7f40 said:
Firstly the Mk2 Veritas honing guide in reality here. Alas, no wooden knobs...
Someone's nicked the traffic lights!
No worries there - the traffic lights get applied later.

Still working out some finish problems (as in the black won't stick :evil: ) - so we're not set on the final appearance. Accuracy is dead on though - both in repeatabilty, and squaring.

To test - we set a blade in - measure everything on a CMM... then remove the blade, disassemle the jig, give it to someone else to reassemble - and set/square the same blade. Spot on.

It's still planned for the back cover of the catalogue mailing in 4 weeks...

Cheers -

Rob
 

Alf

Established Member
Joined
22 Oct 2003
Messages
12,079
Reaction score
0
Location
Up the proverbial creek
Rob Lee":109n1lyz said:
on a CMM...
Wazzat den? :-k Acronym Finder gives me such alternatives as "Cargo Movement Module" and "Calvert Marine Museum (Maryland)", but they seem somehow unlikely...

Cheers, Alf
 

ydb1md

Established Member
Joined
6 Apr 2005
Messages
634
Reaction score
0
Location
Maryland
Hmmm...guessing at file names are we [-X ? :lol:

Cheers -

Rob
(who wouldn't put there, If he didn't want it found... 8) )
Sorry about that Rob, I'm the kid that always tried to peel back the corners of the Christmas package wrapping paper. :roll:
 

Rob Lee

Established Member
Joined
7 Apr 2004
Messages
492
Reaction score
0
Location
Ottawa, Ontario, Canada
ydb1md":3g99movq said:
Hmmm...guessing at file names are we [-X ? :lol:

Cheers -

Rob
(who wouldn't put it there, If he didn't want it found... 8) )
Sorry about that Rob, I'm the kid that always tried to peel back the corners of the Christmas package wrapping paper. :roll:
That's ok - I'll even help you out....

With a bit of effort you could probably find the other 3 images... :wink:

Cheers -

Rob
 

Rob Lee

Established Member
Joined
7 Apr 2004
Messages
492
Reaction score
0
Location
Ottawa, Ontario, Canada
Top