13mm twin flute router cutter

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

flanajb

Established Member
Joined
11 Mar 2009
Messages
1,313
Reaction score
11
I purchased some concealed hinges from Iron Mongery direct and on close inspection they are copies of the SOSS hinges. The only trouble I have is that the SOSS hinges require a 12.7mm router cutter where as the Iron Mongery Direct ones are 13mm. I went onto Welden tools web site and they don't do a 13mm router cutter.

Is 13mm a non standard size?

Thanks
 
Trend do 13mm. but to be honest I would use 12.7 and offset the fence to get 13mm overall. I'd be surprised if the end radius error would be noticeable.

Bob
 
9fingers":lfcsunaq said:
Trend do 13mm. but to be honest I would use 12.7 and offset the fence to get 13mm overall. I'd be surprised if the end radius error would be noticeable.

Bob
Good suggestion Bob, especially, when I discovered that a Titman 13mm 1/4" router cutter is £23!
 
jasonB":2g4z7alo said:
My trend cataloge says their 13mm is £23.10
Is it me or are Trend cutters expensive. I always buy mine from Welden tools and have always found their cutter really good
 
Back
Top