• If you have bought, sold or gained information from our Classifieds, please donate to UK Workshop and give back.

    You can become a Supporting Member or just click here to donate.

Withdrawn 100mm dust extraction fittings

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Sideways

Moderator
Moderator
UKW Supporter
Joined
26 Dec 2017
Messages
3,842
Reaction score
2,173
Location
United Kingdom
I have some surplus, USED, dust extraction fittings for Axminster or similar 100mm plastic system.
5 off wall clips
2 off 45 degree elbows
1 off 90 degree elbow
1 off flanged spigot (grubby)
4 off push in splices
A few unopened packets of screws and plugs for the wall clips

20211113_175233.jpg


Everything is used, but OK. Most of it is clean but a little dusty.
This selection is £64 new at Axminster so if these are of use to anyone, I'd like £20 plus tracked delivery at cost for the lot. Paypal please.

Sorry, I don't have any sections of the clear pipe to go with it.

Thanks for reading. Close ups below ...

20211113_175335.jpg

20211113_175340.jpg

20211113_175345.jpg
 
Last edited:
Back
Top