Search results

Page 204 of the September 1993 Axminster catalogue has a small illustration of Whitehill spindle cutter profiles. I’ve no idea if that is what you are looking for, but if it is here is a photo of the page.

From examining my machine it seems the tension knob adjusts the distance between the two wheels but does not in itself affect the height of the tension knob above the frame. That height is adjusted by the tension lever, being a maximum height of 55 mm when in the tensioned position, with or...

The mainframe height is 1215 mm plus a further 55 mm for the blade tension knob, so the overall height is 1270 mm.

A few years ago a number of forum contributors reported, discussed and in most cases, fixed a similar fault with their Jet AFS-500 air filters. I do not know if any of the information contained in that thread will throw any light on your Dakota DK6680 fault, but perchance it does here’s a link...

Does pressing the ON/SPEED button on the side of the unit have any effect?

The white wire - This might help: NVR switch for Router table

Squeeze-To-Fit Plastic Bench Dogs for 20mm & 19mm holes using Profix 20mm Heavy Duty PVC round Conduit.

Sorry, posted in error.

That's great Bob, glad you're up and running already. Jack

Hi Bob, I hope that in due course we’ll be able to figure out how to restore your PCB to proper working order. In the meantime here are some diagrams that show how you might want to get your air filter up and running without the PCB. No soldering is involved, and none of the existing wires are...

I understand that the 5-terminal version of the KEDU KJD17B NVR Switch is to allow a second push-to-break OFF switch to be added between A1 and 24 in situations where it would be useful.

The sales receipt from Miles tools on 21 October 2013 shows that the part I obtained was for a Dewalt DW625E Type 4. I haven't used the CMT1E much since then, but only because I have another router. Jack

Ah! My mistake, thanks for pointing that out. Jack

EDIT: Please note that I posted this in error, see next post byTrevanion. DeWalt 733 thicknesser belt: External circumference measures about 355 mm. Outside diameter approx. 113 mm. Width nominally 14.6 mm. Thickness approx. 4mm. No other markings on the belt. Jack

Hi Steve, Many thanks for letting us know how to wire the motor should it come to that. A ready-made wireless remote control key fob operating four relays might also be worth considering if ditching the Jet PCB. Three of the relays could be connected to the motor for slow, medium and fast...

I bought the Lidl Parkside PDS 120 B2 fretsaw today. The captive mains lead is fitted with a moulded-on European Schuko plug, not a 3-pin UK plug. No adapter was included. Neither the fretsaw’s dust extractor port (35 mm outside diameter), nor the supplied reducer (to 32 mm OD) suit the Lidl...

Many thanks for going to that trouble, very much appreciated. I shall mount an expedition in search of the mats this afternoon. Jack

Thanks for the rubber matting heads-up. I phoned my two nearest Homebase stores to ask if they had the mat in stock, but neither recognised the description and asked for a product number or suchlike. If you can pass on anything like that I would be most grateful. Jack