Search results

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. T

    Anyone with a 3D printer in Sussex

    I'm in Rottingdean, so just down the road from you. I've got a Prusa i3, max print vol 25 x 21 x 21, so probably not quite big enough for these items unless sploo can come up with a cunning plan.
  2. T

    Sold Fine Woodworking magazines

    Sorry Nick I have not yet received your pm Toby
  3. T

    Sold Fine Woodworking magazines

    No sorry, it has to be all or nothing. Toby
  4. T

    Sold Fine Woodworking magazines

    18 boxes of Fine Woodworking as follows: 1978 No. 12 1979 No. 16 1980 Nos. 21 & 25 1981 to 1992 All 1993 No. 100 missing 1994 to 1998 All 1999 Nos. 136, 137, 138 missing 2000 & 2001 All 2002 No. 157 missing 2003 to 2006 All 2007 No. 192 missing 2008 to 2013 All Most are in good or very good...
  5. T

    A post about nothing much at all.

    We are moving house and downsizing. All my accumulated "things that might be useful" and that we can't fit into the new place I've put on the garden wall. We live on a fairly quiet street and I estimate that 99% of it goes. A great service. I too hate going to the local recycling centre, it find...
  6. T

    Withdrawn Arcoy Dovetailer Jig

    Arcoy Dovetailer Jig. Complete jig except for the bench clamps, cutters and cutter holder. As I understand it the cutters and cutter holder are unique to this tool so if you buy this jig do not expect to use it straight away. Good condition for age, paint chips as expected for a used jig of...
  7. T

    Withdrawn Extra heavy square section sash weights

    I have three pairs of extra heavy square section sash weights for sale. Obviously these would be great for anyone making large sash windows but I have found them to be very useful as weights when glueing up etc. The square section means they won't roll off the bench onto your toes. 1 pair 20lb...
  8. T

    Book selling best outlet suggestions

    Or try Ziffit. I use both, as for some books WeBuyBooks offer a better price than Ziffit and vice versa.
  9. T

    Table saw refurb- kity 618

    Sorry, too long ago. But I do remember on re-assembly that the gap on the sliding mechanism at the far end ( ie away from the leadscrew end ) is quite critical to get just right.
  10. T

    Table saw refurb- kity 618

    I've had a 618 for donkey's years. Approx every 10 years the rise/fall becomes really stiff. I initially tried oiling etc but the only cure in my experience ( at least for the next ten years ) is to completlety remove the motor mounting trunnion / rise & fall assembly, then strip down all...
  11. T

    long drill bit

    To answer the original question, is 10" long enough? http://www.wealdentool.com/acatalog/Onl ... 9_657.html HTH
  12. T

    kity 618

    I've just measured my 618's slot. Its dimensions are the same as the 619 measurements above. My 618 must be at least 23 years old. In that time I've had one new motor and 2 major strip downs. These were because the alloy rise/fall motor mounting trunnion appears to almost fuse with the steel...
  13. T

    kity 618

    Sorry Marcros, totally forgot to check when I got home yesterday evening. #-o I will have another go at remembering this evening. Toby
  14. T

    kity 618

    I'll check mine for you this evening. Toby
  15. T

    Laser Plywood?????

    Dave That's a very generous offer, many thanks. I'll pm you. Toby
  16. T

    Laser Plywood?????

    Dave OK, that's answered my original question and provided some re-assurance, so many thanks. Sounds like I should try Poplar ply. I've just Googled it, doesn't seem readily available in small sheets for testing. :( Avon Plywood stock it but their sheets are 2.5M x 1.22M, but OTT for buying...
  17. T

    Laser Plywood?????

    Thanks for the comprehensive reply. So my question ought to be who else supplies Lite Ply similar to HPC's. This is what I'm worried about, if for any reason HPC stop supplying their ply, it seems I'm a bit stuffed unless I can find an alternative source. I find that their 9mm cuts ok on 40%...
  18. T

    Laser Plywood?????

    Thanks Dave Yes, HPC laser ply 9mm works fine. Unfortunately I've already tried Hobarts 9mm "laser ply", totally unusable by my LS3020. Have you had actual experience of the plys listed by any of the others on your list? I could Google every supplier claiming to sell laser ply and order from...
  19. T

    Laser Plywood?????

    Thanks, I'll phone them & try to get a sample or two.
  20. T

    Laser Plywood?????

    I've got a HPC LS3020. This is a very basic, low powered beginner's machine. I find that laser ply supplied by HPC, 3mm and 9mm, cuts very well, with no problems. I've also made my own 6mm by laminating 2 x 3mm HPC laser ply using bog standard PVA glue, again no problems cutting. However I've...
Back
Top