Search results

I have 8 old internal doors to prep/paint. What do I need for a basic spray paint setup? I have a 9 cfm/25 litre compressor. Basically something half decent for occasional use. Thanks

Now sold

Bump....reduced to £200.

Well used 2000w mitre saw, I've built a fair few things with this! It works fine, however the blade stop isn't working properly and I cant get the blade off. Might be a quick fix, but haven't got time to look. Free to a good home. Collection near Thirsk, North Yorkshire.

Lightly used planer thicknesser. Probably had less than 10 hours use, however now I've got a larger planer thicknesser this is not used anymore. It hasn't been used for a couple of years, and will need the knives resharpening or replacing at a minimum and a good clean. Comes with extraction...

Hmm, as I said lots of opinions :) Good point about trying a cheaper option and a bench grinder and see how I get in. One thing I forgot to mention is I picked up a used spindle moulder and have a lot of tooling with it so would be looking to sharpen the cutters as well. Thanks for all the...

Haha! On the original.

Interesting that you upgraded the fence. It's the one thing I find really annoying and poorly designed.

I know. Should have accounted for the rebate but having fun learning :)

Quick update.... So I ended up with a Axminster TS216 table saw with sliding carriage and their 250mm P/T and got a Axminster trade Spindle Moulder off a member here with a load of tooling (that I haven't a clue about) plus an Axminster AX53E dust extractor. Thoughts....dust extractors are...

What I want is sharp chisels so I'm not swearing when I slip and mess up a rebate! I'm lucky that I can afford something like a Tormek but is it overkill for sharpening some blunt bevel edge chisels?

Okay so read through a lot of posts on here and everyone seems to have a different opinion. My needs are chisel sharpening only and something that is quick to use and fairly foolproof. I can spend up to £500 and was looking at the Tormek T4. Oh and I know nothing about sharpening chisels!

Very kind of you but I managed to get a pair in stock at my local Toolstation.

Haha, yes. Thanks.again.

That was quick, many thanks. £2.70 for the hinge, £8.34 for delivery. Ouch.

Replacing a shonky window in my greenhouse. the window im making will be top hinged and the window frame is sitting in between 2 rafters. I want the window rebated to overlap on all 4 sides to reduce water ingress so will need an offset hinge. Can you buy these with specific offsets or is...

Came on here to post the same, see you beat me to it! Needed a PT and got the AC250PT for £750. At that price it's definitely worth a punt. Also got the AC153E extractor too :)

Interested in the AP200 and tooling and the A326. At work at the moment though. I'll PM you and catch up later.

OK, I've hopefully found an Axminster AT254SB for £500 near me. Would have been nice to have a dado compatible saw but for the price I'm not complaining! Watched a few YT videos and it seems a decent saw. Only issue seems to be the poor dust extraction so will probably get a dedicated unit just...

Mr Rusty. Thanks for that, much appreciated.