Search results

Looks great Wher did you get the top cornice from please

Poor thing! First thing is talk talk talk sounds easy enough but you’d be surprised how many people just soldier on until they crack you made a start by opening up on the forum get to the doctors and try and make an appointment to discuss this with the right services and you can get the best...

DIY kitchens are far better than Howdens it’s your right to insist on the same products I’d get yourself a independent loss assessor and let them arrange things for you they won’t stand for any messing

Best solution for the floor is use 1200gauge visqueen dpm covered with 20mm ridged pir insulation taped at the joints then some decent 18mm plywood (but a cheap set of t&g cutters for the router Amazon ) leave the visqueen 400mm longer at the edges then overlap more visqueen behind it and up...

Put in vinegar and it’ll age them

Rutlands do a lot of different sets and all ways are on sale

I use the rutlands one for drilling the base rails and handrails @ an angle to accept round 20mm spindles it’s absolutely bang on I also use it for drilling the holes for tubular latches on doors, the rods extend through the bottom and then it self centres on the door It’s also useful for...

Thanks for your reply I’m away atm but I’ll upload a picture when I’m back Thanks again Bobby

I totally agree and they actually tried to charge me an extra 2 hours of labour the company is called northern electrical based in blackburn lancashire

No I’ve identified the problem is a small transformer the size of my fingernail cost me £350 for a company to send out an engineer only to inform me the part is unavailable atm so I’m stuck with a unusable machine What’s your problem

Your best buying a dewalt battery 18v blower I use it for everything and it’s brilliant for blowing dust off my clothes I use it to dry my car too

Use these from Screwfix there made for fixing flooring and they hold well and are hidden Tongue-Tite TX Countersunk Floorboard Screws 3.5mm x 45mm 200 Pack

Level floor Install Dpc membrane (visqueen) Install underlay Use engineered planks and just have a floating floor it’s the easiest way

Why do you need shims? Why can’t you just bed each end on a dryish why do you need shims ? Why can’t you just bed each end on mortar and level up ? Also 50mm is too small really you should be looking at something similar to the width of the lintel and 150mm long at each end 50mm is a very...

Avoid using any copy of batteries they often fail and can cause fires

I’ve got the Laguna 14bx and it’s well built and a great saw I’ve changed from a startrite 352 and it’s light years ahead in performance and very easy to set up

If you’re using a plastic tub make sure you fit a pressure release valve like this otherwise it will collapse check the link https://www.amazon.co.uk/dp/B093GSSST7/ref=cm_sw_r_oth_apip_nMyCRm8XFcmCU

https://www.axminstertools.com/media/publications/2015-00-cover.pdf