Search results

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. TominDales

    20mm Bench dogs and 20mm hole sizes??

    Good suggestion. I didn't like the expense of a reamer £20, when I could buy new dog parts for £22.
  2. TominDales

    20mm Bench dogs and 20mm hole sizes??

    Thank you Sideways and Cabinetman. I'll drill a 20mm hole in the bench and give it a try. I built the bench in 1975 whilst at school, using 3 inch thick pine with beach edges - traditional city and Guilds crafts approach, very solid and heavy, and have modified it carefully over the years...
  3. TominDales

    20mm Bench dogs and 20mm hole sizes??

    Asking for advice. bought a 20mm dog but have 19mm holes in bench. I've a few 3/4'' (19mm) holes in my bench top and apron, used for holdfasts and dogs (around the face vice and apron, not many about 4 on top and 8 in in the apron). I have home made wood dowle inserts that work as dogs...
  4. TominDales

    silly person builders

    good advice, you are there for them. They learn for themselves, makes them more resilient in the long run.
  5. TominDales

    Table Saw kickback and trimmed finger (Graphic description & images)

    I wish I had gone down that path, quite tight for space but interested in a band saw, do you have a recommendation. I probably do about 4 hrs per week of work, mainly using hand tools. Often in burst through the winter on major projects, but probably average 250 hrs per year, so could...
  6. TominDales

    Table Saw kickback and trimmed finger (Graphic description & images)

    Thank you for posting this, very brave. I'm glad you are not put off, really nasty. Thanks for sharing your learning, even with a push stick accidents happen. The merchants and especially American Youtubers, give the impression a TS is just another tool, but its a major hazard, as you have...
  7. TominDales

    Harrogate woodworking show

    Help, I have a question: what grinding wheel or tool sharper should I buy? - post Harrogate. A bit of an impulse I bought Nigel Shenton repeat edge sharpening jig at the show last week. I had read about these jigs on google/youtube a few years ago but seemed pricy for the little turning I...
  8. TominDales

    Harrogate woodworking show

    Good points raised but in defence of the exhibitors there was quite a bit more going on than turning, There was a Windsor chair exihibit with demos on the West end wall oposite the boat. There was carving along the south side and someone carving with an adze in the middle row. There were...
  9. TominDales

    Harrogate woodworking show

    Went to Harrogate today. My first visit and had a great time. Got lots of advice and admired some expensive wood. I'll remember to keep hold of trees when my parents next have to fell some dying ones, a cherry and a magnificent maple are reaching end of life. Shelton was impresive as were the...
  10. TominDales

    Harrogate woodworking show

    I plan to go on Sunday, so see some of you. Despite living only 12 miles away this will be my first show.
  11. TominDales

    What ideas have you had for reducing Electricity consumption

    If using for work or storage you may want some heat up their. Needs ariing but not a huge draft. However best to insulate the loft space ie the floor if not in use for the reasons Phil says
  12. TominDales

    What ideas have you had for reducing Electricity consumption

    Hi all, lots of comment arising on this topic. The physics isn't entirely intuitive, things can feel hotter or cooler but that is due to their ability to conduct heat from our hands, so a radiator feels colder than the soft furnishing do despite being at the same termperature.. However you...
  13. TominDales

    Woodworking & craft shows and events…

    Harrogate show - which are the best days? I live near by so can go to any day. Is it worth booking the Friday off work? or are Saturday and Sunday ok too
  14. TominDales

    joining oak board to make a swing seat

    Thanks all for your advice. I've decided to go with slats as Jacob recommended, it also allows for better economy with the wood, solves the glue fail issue, and the Mrs is ok with that justifiying it using Jacobs argument about wet and rot, was well received. I'll will allow for expansion...
  15. TominDales

    Workbench vice

    Lots of good advice on here. A few thoughts to add. Buying new; there are a lot of videos by Paul Sellers on buying an installing a vice/vise (vice is old UK spelling eg Parkisons). Sellers recommends Eclipse 9'' quick release as an affordable new vice. Second hand: a good vice will last...
  16. TominDales

    Outdoor furniture, how wide can the slats be?

    Thats interesting. I'm making a posh swing seat out of oak and the design is one solid piece of wood 60cm by 20cm by 3.5cm. its in a separate post. I was planning to leave it out all summer. It probably only has to last another 5 or so years as the youngest will be old by then, although we...
  17. TominDales

    joining oak board to make a swing seat

    Thanks I've got the blue waterproof evostick exterior, I thought I'd use Dowel and edge but joint. Otherwise I was going to glue two boards flat down one on top of the other and maybe a few holding screws from underneath. The dowel method is virtually invisible, as long as the joint doesn't...
  18. TominDales

    joining oak board to make a swing seat

    I'm planning to make a new swing seat (upgrade the look of the garden) out of oak. The design calls for a board 60cm by 20cm by 3.5cm thick, it then has 4 hole drilled in the corners to hold the rope. I have several old planks that are too small in one dimension, ie 3.5cm thick but only 14cm...
  19. TominDales

    Axminster AT406WL or Record Power Coronet Herald?

    Dave, I would recommend having a look to see if there is a turners club nearby. the AWGB has a list. map and also a list. Club Map – AWGB, Some clubs can be a bit of an oldies clique but many offer demos and teaching days and experienced members and are very welcoming of new blood and also...
Back
Top