Search results

Most know that the Dewalt rails are not great for joining together. Here’s how I modified Makita rail for a cheaper alternative to using Festool rails. I used a 12mm straight router bit with a 20mm guide bush. I made a jig using off cuts of mdf, the 20mm hole is offset 6mm to where I wanted...

I’m looking for a couple of measurements from the base. I want check if I could retro fit the base on to my Dewalt router as Dewalt make the t10,t11 routers for Trend I hope it will, and hopefully save me from getting another router. So I need Distance between the sliders, Diameter of the...

I have a dewalt dvw902m and using a cyclone, 38mm inner hard pipe and 38 mm flex connected to the tool with blast gates at the moment and The hose that came with the extractor has an inner bore of 35 mm. The cyclone has 50mm Ports I was thinking of upgrading the main run to 50mm hose and 50mm...

8040 swivel bearing SKU 3842532209 Swivel Bearings - Joint Connections - BR Range X2 M8 clamping leaver SKU 3842516847 Clamping Lever M8x40 200mm BR 4080 10mm slot aluminium profile with D17VD17V drilling to suit swivel bearing 225mm BR 4080 10mm slot aluminium profile 40 X 80L...

Got fed up with the hose adapter falling off because is was always getting caught on the edges and as I use dewalt airloc connection is quite large also. Here’s my solution. Silicone reducing elbow 28mm to 32mm 32mm to 35mm adapter to suit dewalt hose fittings Fitted to the router

I was thinking about getting a trend adjustable lock jig Trend LOCK/JIG/B Adjustable trade lock jig But then seen this one. https://www.madeinbritain.org/members/b-w-jigs-ltd Looks good especially the spindle and euro hole guide. Anyone used one yet?

Fitted a transformer in a tstak case. Transformer with smashed case Installed inside box Found perfect 110v sockets to fit Used neutrix powercon connections for plugit style removable lead

Few years ago I got a dewalt 18v xrp plunge saw (old style dewalt batteries) I had dewalt rails at the time, if anyone who has tried to joint 2 rails together they know it’s nearly impossible to get them to stay straight for 2.4 cuts so I brought a 2.6 rail it’s great for making them cuts but...

Made a out feed table for a dewalt de7492 table saw Simply hooks on saw frame and the top locates on 4 10mm dowels. The brackets screw onto the top for transport

Well i had a Bosch GST100 BCE it served me well for nearly 20 years but lent it to someone and they fecked it up. Also have Dewalt 18v DCS335 for eveyday use. So I’m in the market for a 110v one for my mft to use inverted. Obviously if I had an unlimited budget I would go for the Mafell P1CC...

I’m thinking of making one but only have high pressure dust extractor do not sure if will be sufficient. So anyone made one and using high pressure extractor

Made this few years ago and it’s about time to cut bout 20mm off top edge as it’s a bit cut up as you’ll expect. Any thoughts on how I could make a sacrificial edges as I will only be able to cut some off so many times.

Made these about 6 months ago so I could have full support and flag stop for repeatable cuts up to 3m with the mitre saw. They are self supporting off the stand and only require 3 m8 thumb nuts each side. I need to make the outer bolt adjustable in height as it hangs a bit low and raised up...

Hi I’m trying to remotely actuate my extractor it’s a 110v dewalt dwv901 as my previous post-https://www.ukworkshop.co.uk/threads/power-take-off-via-remote.128104/ I’m trying a different approach now and need someone in the know to see if my schematic will work. Delay switch-...

Hello everyone I’ve recently found this forum I’ve never posted any of my projects before on any site so thought I would start with my most recent project for the work shop and for site work. I used a Bosch GTA2500 mitre saw bench as the base for it so it’s easily transported. I made mft3 style...

What would be the best adhesive use to glue push fit waste pipe for my extraction system thanks

Hi all this is my first post so here goes. I have been in the process of setting up my small 6m x 3m workshop. Most of the time I work on site so my tools are 110v/cordless so need to be easily moved into a van and back in again. I’m now at the extraction stage to keep the dust down by fitting...