Search results

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. C

    Axminster AC370WL wood lathe. Speed lever issue.

    Hi all. I have a problem with the speed lever action on my Axminster Craft AC370WL. It is getting harder and harder to adjust the lever to faster and slower the lathe. I have removed the covers and cleaned out the dust and there are no obvious faults that I can see. Has anyone else had this...
  2. C

    I'm considering buying an Axminster AP406WL Pro. Any thoughts please?

    Thanks Blister. Thanks Denmark. I'll have a look at this as well.
  3. C

    I'm considering buying an Axminster AP406WL Pro. Any thoughts please?

    I currently have an Axminster AC370WL but would like to upgrade. I like the spec of AP406WL but I would appreciate any feedback before I take the plunge. I'm based in Oxfordshire. Ta in advance.
  4. C

    Turning from logs.

    Hi Dalboy. Many thanks for your reply. The diagrams help a lot thanks.
  5. C

    Turning from logs.

    Hi all. Hope this finds you well and enjoying your wood chip manufacturing. I'm still a novice turner and I'm reading up on wood turning techniques. I have come across this similar diagrams twice now (See attached photo) and would like to question why they chose to cut it as per their diagram...
  6. C

    Glue

    Thanks for this. Very useful info. I’ll order up bits today. Regards. Cefn.
  7. C

    Glue

    That’s useful. Thanks for your reply. Regards Cefn.
  8. C

    Glue

    Many thanks for this. 👍
  9. C

    Glue

    Hi again. That great. Never considered this. I’ll check bolt size and see where I can get a couple. Best wishes Cefn.
  10. C

    Glue

    Hi all. I need to fit a nut to the bottom of a pine timber bench leg. This will be used to accept a height adjustable foot. I plan to tightly chop in the nut and glue it in place to accept the foot bolt. What glue can anyone suggest please. It needs to be strong as the bench gets moved about...
  11. C

    Spalted Beech Rolling pin.?

    Please can I have your name and address in case i die. Just asking for the wife. 😉
  12. C

    Spalted Beech Rolling pin.?

    Cheers Mike I guessed that might be the case, but whilst looking for ideas online, saw someone had made a pin from Spalted beech and hence the question before I went ahead. (y)
  13. C

    Spalted Beech Rolling pin.?

    Hi all. Found some lovely Spalted Beech and wondered if it is a suitable wood to make another rolling pin?
  14. C

    Wood filler ?

    Thanks Mark and everyone for your suggestions. Thanks for this however that wouldn’t work in this case. 👍
  15. C

    Wood filler ?

    Thanks Aidan. I’ll give it a try. 👍
  16. C

    Wood filler ?

    Hi again, I'm making another Band saw box and have an unsightly, thin open joint that needs filling. See attached photo. Question is, what fine fillers are out there, that would not stain the wood and will take a Danish oil finish? I did try glue and fine saw dust but the crack is too small to...
  17. C

    How can I repair/remove a dark water stain on Oak laminate worktop?

    Hi Morris, Oak is the only type of wood I've tried this on, so can't really say. It certainly worked well on my oak stain though. Had to use a very fine sand paper when dry and the finish job is 90% good.
Back
Top