Search results

Something bright and colourful. Do you font keep tripping over it.

So if you were to build up a mound where she'd was to be sited, say a metre, then height us taken from there? If you excavated a metre, then had a 3.4 metre high building, would you get away with it. As it is then being only 2.4m above the mound?

Not a good idea. Fuse switches are not designed for repeated switching. Light switches are.

Will be interested to know how you get on with it.

1000kg adjustable castors...

Apologies 5m2 to me is the square area, ie 2.5 x 2m. So at 5m x 5m makes sense now, but still go for concrete lintel/posts spanning the filings.

@JohnerH Please update us as to what happens when you do connect, will be interesting to know 👍

5m2, that's about a 8x6 shed area, why a 6x2 joist floor? Seems excessive. Given what you suggest, would concrete posts be a better option than oak across the pilings?

If you disconnect the drive belt frst, it's unlikely to blow a fuse.

Assuming your mean estimate speed was 250mph This gives 366 feet per second. Assuming a 20ft wide span of roadway, then the max length of observation time is 0.03 seconds. Which is too little time to register a viable identification Any observation at that velocity would be approximated by the...

Some nice stuff for next year.

Agh, didn't realise it was a flat belt. How are the bearings on each pullets? Any excess play could be causing a wobble and throwing the belt. Still think that driving and driven pulley may not be co planer to each other though.

Have you thought about canabilising your disc/belt sander? Remove the flat belt platten, belt and roller, turn end on, and make a 12" MDF disc and bolt on to the 8" disc, add velcro and voila a 12" disc sander. Did same with one I had, did me well for a couple of years till motor blew up. Now I...

Are all the cogs parallel and coplaner with each other? Also the belt around 2, seems to be sitting very high in the pulley.

Thread 'Drum Sander - Performax 16-32 Plus - single phase' https://www.ukworkshop.co.uk/threads/drum-sander-performax-16-32-plus-single-phase.147333/ Also Thread 'Jet 22 44 Plus Drum Sander' https://www.ukworkshop.co.uk/threads/jet-22-44-plus-drum-sander.147029/

Sorry, not my area of expertise. Just when I was thinking of buy old 3 phase machines, the types that provided good reviews back their prices put me off Similar thred in 2022, here's the link https://www.ukworkshop.co.uk/threads/3-phase-inverters.139891/post-1621951

Decent 3 phase converters aren't too cheap either.

I am using a CNC and laser for hobby CNC is a Sainsmart ProverXL 4030 v1 with a spindle upgrade to dewalt 611 router. Laser is a Creality Falcon2 22w.diode laser Software I use is Carveco and Candle for GRBL on CNC and Lightburn for the laser. I have found both to be great machines, likewise...

Epoxy flood coat?

Hi and welcome to our insanitarium 😂