Search results

Thanks paulm a really good set of instructions with excellent photos i have one to fit and will use your instructions i like the bit about laminating the jaws to give extra strength. Cheers, Boomerang Bender

As always its such a simple idea to do the reverse cut to avoid tear out after years of doing it wrong thanks for your post it only goes to rove you are never too old to learn. :D

I have just read this post and am like the post by Rorschach I don't understand how you are using them can you post a picture. Cheers, BB

Thanks for the heads up i will try and get a copy of this magazine as i am keen to read this article. Cheers, Boomerang Bender.

I have a book called modern wood turning by Gordon Stokes published in the 1970s which uses the Coronet Major as the lathe for demo purposes. its available on ebay for £2.45 some of the subjects covered are the use of the Coronet Major and its features . 1,Drilling long holes using the...

Nice bowl and a good use of spare wood its half way to being a top class knitting bowl LOL.

I have just acquired an old LV bowling bowl and will give this project a go i may try and salvage the white circular disc on the bowl as i think they were originally ivory and create an inlay . Thanks for posting a real inspiration. Boomerang Bender.

Hi I am new to turning but would it be possible to remove as much of the blank as possible by drilling the bowl centre down to bring the weight of the blank to a safe weight for this lathe. Obviously the balance of the reduced blank would have to be taken into consideration,

That,s a real quality candlestick i like the style and finish well done.

I have a coronet major lathe with most of the attachments, its a really good and versatile lathe with the reduction speed attachment V belt drive for turning large projects up to 24 "when you turn the head stock 90 deg , ( i.e. facing outwards the turner and to the tools )Although the...

Thanks for the thread chart and info very useful

I have read recently that anyone with a nut allergy can have a reaction to turning wood of nut bearing trees ie walnut since the wood contains the same allergens as the nut so good dust extraction or wearing a mask when sanding is advisable. Also consider other people who may be in your...

I have the same problem on my old Coronet Major and since the tailstock alignment is governed by the locating grove in the tailstock slide bar any wear on the locating pin will allow a slight deviation on a sideways movement, on a modern lathe with a flat surface for the tailstock to sit on it...

What an inspiration i am new to wood turning but to see something turned and sculpted in Sycamore such a common wood is beautiful there is hope for me yet, many many Thanks for posting , BB

My first try at one this week but only two segments i intend to put a snowman in the caged part but after turning i am tight for space to get it set correctly . My other concern is the size of the ornament and weight considering it has to go on a smaller tree. Hopefully my next attempt will...

Try cooling the 4 pronged Morse taper with ice or a tin of canned air to make the steel contract before applying force to remove it.

I have a just acquired coronet major (red painted) and bought a live centre tail stock and when when i present the tail stock to the head stock there is an offset of about 2mm low between centres i am thinking there must be some wear on the bushing on the head stock i also acquired 2 spare...

Excellent idea i have a long chest freezer which i used for home brewing with a thermostatically controlled heater cable approx 60 watts . I think i can turn this freezer on its end and drill holes for the air circulation and convert it into a kiln. stepping up the heat as the drying continues...

I read recently that the dust from sanding walnut and other woods which bear fruit ie nuts. The wood contains the same allergens as the nuts and warned that anyone with a nut allergy can suffer a reaction to breathing in the dust, sounds like common sense but i would never have made to...

A work of art thanks for posting i have just started turning and hope to attain your skills.