Search results

Reluctant sale, I just have got enough hours in the day to do everything I want to do. Vacuum pump Air con gauges Sacrificial gas bottle empty All leads and gauges show Vacuum pot and lid New unopened vacuum pump oil 2 vacuum bags Small induction oven to harden wood that has been...

We have been given a teak garden table and four chairs, i think it had stood in direct sunlight for a good many years. It is in need of nourishment badly, luckily there are no splits or cracks. I have seen Rustins Teak oil at £54 for 5 litres, or Osmo Teak oil at £23 for 3/4 L I am not looking...

I was asked by a friend to cut down an old dead Japanese Maple tree that is around 65 years old. Some of the limbs are split where it has dried out. It is quite dry ranging from 15% to 8% according to my meter, the smaller the limb the drier it is. The Base at about 8in is a little higher. The...

I want to hold two pieces of wood together so that i can sand them and get identical pieces. I don't want them coming apart till later, can anyone recommend a double sided tape that will do this please.

My shed stands next to decking and over the years rain bouncing from rotted the lower part of my shed. I have replaced the front of the shed and want to fit a drip rail, unfortunately they don't come in long lengths, i am looking for4.2 meters. I am thinking of making the drip rail myself but...

I am looking for a supplier near me, GU466BY. I see Hobbycraft does some Davids Fastglas Resin 1L | Halfords UK But not sure if it's good for woodworking projects. As you can tell i am very new at this :). Have looked on Youtube but what i see they is a bit advanced for me as yet though would...

Just got myself a Vac pump and a pot. I want to use it on wood that has splits in it (i have thrown countless log blanks away as they are unsafe to turn) I have seen videos where they use clear thin plastic and wrap it around the work piece then stand it on another piece and use a hot glue gune...

One set of Woodcraft concealed bed hinges. Bought two sets of these with the view to make beds of course. I did in fact make our bed but never got around to making a second bed. These brackets are really good and strong with no movement at all after 20 years. The bed was based on Norm Abram...

I have three sets of these with fixings. But I know I will never get around to using them unfortunately. £20.00 per set plus postage

I made a post on a subject under General Metalworking, i looked back on the post and it appears to have been removed. I scrolled to the bottom and there is not a second page so i can only assume it has been removed, i would like to know why is possible.

This has been reconditioned as quite a few vital parts were missing. It is now in fully working order. The jaws are 9in*4in with an opening of 10 1/2 inches at the jaws. This is up for sale elsewhere. £65.00

I want to make a dust extract reducer for the rear of my compound saw. The stupid little round extract thats on the saw itself collects less than 5% of the saw dust. The saw is mounted on it's own table and i want to make one out of 1/4 ply behind the saw so it collects the whole of the dust...

Just seen this on facebook, Trend cutters at £1.00 each. Bankrupt stock...

I have a scheppach sliding compound mitre saw, It's a great saw except for one not so small thing. When i release the guard lock and compress the head of the saw to make the cur the guard does not rotate out of the way to allow the cut to take place. It was always stiff from the work go but now...

I have a No1 Redea wood workers vice i am renovating (i think i have posted this before but cannot find it). I have been looking at paint for it but can only find the Humbroll tins of paint and they are to small., I think i need blue though my vice show some red so i am not really sure what the...

Been turning some spalted wood, it will be finished in oil but is it food safe?

I bought this vice just before the first lock down. The vice is a monster to say the least with a 12 inch opening and huge jaw plates. The quick release is missing and the half nut is held in place by a hand carved bit of wood. It works perfectly but i want put back to its normal. I an going to...

Over one hundred assorted drill bits, there are some tap and a few reamers. £15.00 Collection only due to weight For sale elsewhere.

I bought this for a job i was doing at the time then found an easier way to do what i wanted. The handle is held in place with one screw by the looks of it, i will take the handle off for postage purposes. £20.00 plus 5.57 postage

I wrote something on the 'parting off' post. It got me thinking about Apprenticeships and who has done one. I started mine in 1966, my stating rate was 1s 6p per hour (about 18p in todays money) At the end i got my indentured papers on like parchment paper in fancy scroll writing, and still...