Search results

2016 3 Phase Hammer A3-41 Spiral Head planer thicknesser with 2 x aluminium extension tables + digital hand wheel and a single phase 150mm Charnwood W791 2HP Extractor with cartridge filter and 3m of hose - this is the trade rated extractor so can be run for several hours at a time This is a...

Remaining items to clear out of the workshop, collection only unless otherwise stated from Fetcham in Surrey. For quick replies my number is 07956349415 and if you have any questions please ask away Please excuse the quality of the pictures, workshop is a bit of a bomb site so if you want...

Doing site work now and this plane is much too nice for that. Good condition, slight blemishes on the sole that you can see when the light catches it - doesn't affect use in any way. £120 posted via Royal Mail

The workshop clearout continues Excellent condition but as you can see it barely gets any use so has been sat in the corner gathering dust. Was used almost exclusively for routing keyhole cutouts in hanging items I used to sell so extremely light use. This setup brand new is over £600 If you...

Closing up shop so slowly starting to get rid of all things starting with the smaller bits; (Items for collection from either Fetcham or Dorking in Surrey) Axminster Air AW50N 18G Brad Nailer All works completely as it should, but pretty grubby. I will give it a quick clean and grease before...

Collection only on both from Surrey, have a forklift etc for the bandsaw to help load. 3 Phase Hammer N4400 Bandsaw £1500 if you'd like HD pics just message me, phone was all I had available at the time. Generally great condition, table is marked on top from previous owner but doesn't affect...

Great condition GSR drill and GDR impact driver, comes with charger and batteries - no box. Slight copper paint overspray on the drill though not very noticeable, otherwise excellent condition. Very handy pair of drills and the impact is surprisingly powerful, having a big workshop clearout so...

As title, 1.3m long flexible router template guide - bought for a project that never happened so its unused £55 posted

10 x strap clamps with corner brackets and 3 x without the strap. 25mm strap is all you need which is easy to get to make these work again. Majority of the straps have glue on so stiff to use but easy enough to replace the strapping. £30 posted for all of them

Bosch GKS 12V - 36 with 12V 4ah battery Barely used as didn't fit my needs. Slight scuff on top but that's about it. Can be used on the Bosch guide rails, better for thin sheet goods. No box/charger. Fitted with bodge extractor adaptor! £60 collected, can post for extra £5

Purchased around a year ago and not used enough to warrant keeping. Had extremely light use and as such is in good condition. I kept most of the boxes but have everything that came inside them, inset rings, original fence pieces, manual etc etc. Only thing that might have gone missing is a pair...

Here's a chance to grab a bargain - my *barely* used Axminster Trade Series MB103 310mm Thicknesser WARRANTY TRANSFERRABLE Purchased around a year ago and quite literally used for around 1 hour total. I quickly realised I needed something wider so was succeeded by a 16'' Hammer but by that...

Purchased off of here around a year ago and used the grand sum of...3 times. Simply didn't fit in with my workflow so is currently gathering dust in my neighbours workshop. Whilst I had it though I sent it back to Axminster for them to give it a check over and while they had it they gave it a...

Hi all, Excuse the messy pics, up for grabs is my 3 phase Sedgwick 310mm planer/thicknesser with a 4-blade Tersa head. This is actually the older one that was green but the previous owner decided to paint it in the new colours. If you have not seen how a Tersa block works, it basically allows...

Excuse the messy workshop, here is my Deft 10'' cabinet saw, with ti-ni gold coating including right hand side extension table, outfeed table with support, several Freud blades in good condition, featherboard and separate throat plate for running a dado stack. Top has several rust spots but I...

Hello all, I bought a Startrite Mercury pillar drill that I completely cleaned, stripped, replaced bearings etc etc and the last thing to do it replace the chuck as it's knackered. I have read all the other threads about it possibly having a proprietary version of a JT33 taper or something but i...

Hello all, I was wondering if anyone had any experience with the Axminster TH410 thicknesser? There seems to be limited info out there so trying to decide if its a good purchase is quite difficult. I currently use PAR timber so just need to get it down to size but will look to get a surface...