Search results

Suffering Succotash, that is cheeky!!

Got followed around by what seemed to be a bog standard honey bee today near Bognor. I think it thought my hi-viz was a tasty flower.

There's no straightforward answer. £400 + for a Festool C18 Plus would give you the perfect driver for the job, or the Milwaukee M12 BDDX would be a close second. Although a "hammer" drill may be necessary depending on what you're mounting to. Beyond those the cheapest hammer-drill/driver...

I've never tried their service but some of their products are really c**p. As in most businesses I think there is a battle between the engineers and the accountants, the engineers wish to make decent products and the accountants are there as agents of Satan. I'm sorry if any accountants are on...

I know next to nothing regarding block flooring, but you can probably get a modern product to suit. Skrewfux sell 7kg tubs of Bostik Leybond for this type of flooring at £40. The flatter the underfloor the less you'll need. I suggest looking at this first.

It's gotta be the classic Bic Crystal. Always works, always smooth, always a nice line and not too expensive. Never had a cheap "imitation" work quite like them. You might be able to buy a box of 100 cheapies from Tesco/Poundland/Fortnums/where-ever but they're never as good.

Not sure I've seen a wormdrive by anyone in the UK, very popular across the "pond" and I wonder why we don't have them. I can see the advantage in not having the motor stick out the side.

Motor swopped over perfectly. The wiring next to the commutator and a few segments of that were fried and it looks like some plastic shield/shroud round part of the armature had been worn away which is probably something to do with the problem. Timber framers have always liked these as tough...

In general I find Torx miles better than most posi-drives. A new posi bit with decent screws (reiser, spas) are usually fine. A worn bit makes things worse and most cheap screws, e.g Screwfix are fairly poor even with new bits. The only problem with torx is the bit can get a bit sticky in the...

I was lucky enough to get two Fisco tapes, made in England with inches only, marvellous. I had to get them brought over from the US as they're not available over here though!! Unfortunately the tape wasn't particularly robust and has buckled, just like my Stanley's at the end on one. This...

Hiya Patchy There's many great people on this site, with heaps of useful advice so welcome and enjoy making sawdust. Just beware there's the odd grumpy b****r around but don't get put off by any tool sharpening talk that turns nasty, they just don't get out much or have friends :( Have you...

I really can't see what clothing you wear whilst trying to drive fast has to do with insurance outside the sport!!! Or did you wear the 6"inch stilettos at all times?

Hi, Medium to large yard. Several people in the office. Hobby friendly with small shop for tools and wood supplies. I think you can self select but probably need to tell someone in the office you are there. They will deliver for additional charge. You can order by email but no online forms...

Am just looking at a C9U and C9U2 circular saw on my floor. The rotor burnt out on the U2 and it looks like a straight swop for the motor housing from the U (which has a bust base unit/blade housing). Anything to look out for? Any reason why the 4 year old U2 didn't last as long as the 20+...

If someone had nicked it from me and sold it on eBay, or down the pub, I'd be annoyed at him for nicking it and whoever was buying it on for creating the market. He may be genuine, but if you think something is iffy just don't buy it, not just for your sake but also respecting the livelihood...

I think the paraffin may be a thinner so that it actually sprays from the spray nozzle, or else it helps keep you regular if you drink it. Axminster says the paraffin lowers the viscosity, but fail to tell you why, it would help it spray better of course. I think the paraffin evaporates off...

With mine I'd have to say I've never really done enough checking to get to the bottom of any issue. Like you the rubber strip has been fairly hammered and is not necessarily always right next to the blade (some tracks have newer strip than others and were cut-in with one of four possible blades...

Some people like to make a "heated" and ventilated cabinet to prevent rust occurring due to condensation. The simplest is a cupboard with an old fashioned light bulb in it to keep some warmth there. I think some connect this to some sort of temperature sensor or timing circuit to cut back on...

I don't know if I have the model you have but I do have a Mafell saw which claims the same thing, I.e it will cut the same point on the bevel. I'm not convinced it does. The instructions mention a tracing point on "the pivoting part" for following a line without using the track, which is beyond...

I have a couple of Japanese chisels, one for bashing and one for paring. They are miles better than my Bahco orange handled chisels for both jobs and a fair bit better than my Stanley's. They stay sharper much longer mainly. Yes they may chip a bit easier but they don't blunt or deform...