Search results

Bought August 2023. Filters seems ok and its in great working condition. Remote control is included but I have the hangin chains or bolts ( I bolted it directly to 2 pieces of timber, which were screwed into the trusses) Collection only from Greater Manchester or I could travel a bit to meet. £85

Record Power SC4 chuck in good condition with: Key (I cut the ball end off) M33 insert and tool to remove 50mm jaws Faceplate There’s only 6 screws pictured as I’ve lost 2 but some I’ve got 8 sorby screws being delivered tomorrow so there will be 14 in total £90 Posted to UK (SOLD to Sru )...

I’ll be moving soon to a house with a much smaller garage so I’ve decided to try and sell my lathe and turning tools, etc. I’ve not done much for a while so I’ll hopefully not miss it. KS Midi FU 350 Lathe. Bought from Hope Woodturning in January 2021(I can give a digital copy of the receipt)...

I previously said I'd never sell this..but I've a house move coming up soon and would like to raise some extra funds. A reluctant sale. Bought in October 2023 in excellent condition. Original purchase receipt I bought the bare bones set and the 1060 cutter/domino assortment. The trim stop was...

Few years old, good working condition. Currently on an old bench that is gathering dust, old tools, etc. Details here https://www.axminstertools.com/axminster-trade-vices-quick-release-carpenter-s-vices-225mm-9-505550?queryID=1c9a6cc20364a4ee27ec10e149c51d3a It’s the 225mm version on the...

Stanley Sweetheart Low angle jack plane. Very good condition, little bits of faint surface rust (pictured the best I could). £85 posted (UK only) Hamlet 1/4” bowl gouge. 14” handle. Not used much, reshaped original flat grind to a fingernail and sharpened a few times so flute isn’t far off...

Took it apart, gave it a quick clean with air duster and sharpened the iron. Tried to show as much of the condition in the pics. It’s a good useable plane but I’ve hardly ever used it as I’ve got a 4 1/2 that I much prefer. £25 posted (UK only) SOLD

sorby pro edge 240v version. patch of corrosion/oxidation on drive pulley with a corresponding patch on the belt. Presumably from being unused In unheated workshop. Shown in photos. Doesnt affect operation, I only noticed when I removed the belt to photograph the platen. Slight discolouration on...

ALL PRICES INCLUDE POSTAGE (UK ONLY) Hamlet 3/8” bowl gouge. Purchased this not long ago but it’s hardly been used as I use my 3/8 all the time. SOLD Wealden T4U6350 up cut spiral router cutter 6.35mm diameter and 1/4” shank. Purchased this with the intention of buying or making a loose tenon...

Good condition. £30 posted (UK ONLY) SOLD

SGS 18 gauge nail gun details here SGS Brad Air Nail Gun F type (18 gauge) 10 to 50mm Euro fitting Not had a lot use as i bought a more expensive gun soon after (this was my first air nailer and the slippery slope happened quickly). At first I did notice the safety mechanism was a bit stiff and...

Bit of a long shot but thought I’d ask anyway. My site mitre saw started playing up this morning, sounded a bit weird and the blade would stop occasionally. Before it stopped altogether it spat out something black so I’m guessing the belt has snapped as the motor works fine. Here’s the long...

Finally ordered an airbrush, primarily to use with chestnut spirit stains. Im unsure what liquid is best for cleaning, so any advice would be much appreciated

Bought this a couple of months ago, used a few times. Condition is very good. 240v boxed with all the original parts. SOLD

I got a Trend T10 a few weeks ago and it’s been working fine. i went to use it today and the speed is fluctuating a lot (even under no load) to the point where it sounded way too fast. I tried changing the speed setting, where it would stabilise briefly before becoming very erratic again. A...

Trend T7 1/2” 240v router in good working condition. Included: Spanner 1/4“ collet sleeve guide bushes (30mm and 16mm) and screws to fit. extraction port and screws to fit. trend unibase with 30mm bush fiited (screws also included to fit base) Fence SOLD

Record Power 100mm hose from a recent Camvac purchase. 2 metre length. Brand new £20 posted by RM 48 tracked.

I’ve only used battery and gas nailers on site but I want to get a small compressor and a 18g Brad nailer ( maybe a 23g in the future) for My home workshop. ive never owned a compressor before so Id appreciate as much advice as possible please. I’ve done a bit of searching here and got useful...

I did A search about a month ago about air filter orientation but couldn’t find any long term opinions so thought I’d see ask here. ive got a record power air filter hanging in the usual way. Due to home workshop being tiny and quite a low ceiling, even with the filter being fitted hook to hook...

I’m going to make a router table and want my current routers to remain as hand held. I’ve decided to get a triton as I’ll be leaving it permanently in the table and I’d appreciate any advice which to get. Of course, budget is a concern. I don’t do a lot of router table need but i think the main...