Search results

An assortment of drive and live centres - MT2 Four prong 1" drive with removable/adjustable pin and body bored 1/4" for lamp boring£10 Note: most lamp augers are 5/16" but 1/4" augers do exist - you would just need to find a left handed one! MT1 ring centre with removable tip & hollow body...

Axminster 22mm O'Donnell jaws black zinc plated £70 Axminster Internal engineering step jaws (The old steel type so no additional carriers needed for these) £35 Will post at cost to any UK destination.

Axminster super precision chuck fitted with a 1" x 8tpi backplate and it has an extended chuck key. I can swap the backplate for a 25x2mm thread if that fits the bill. £150 Other backplates with other threads are available from Beaufort Ink Axminster "A" jaws with mounting screws £35 (2 sets...

I have the following backplates for sale which will fit either Axminster super precision chucks or Versachucks. T04 - 1" x 8tpi £15 each (two available) 30 - M25 x 2mm £15 LH - Looks to be M25 x 2mm but could be 1" x 12tpi left hand thread- £15 4" M25 x 2mm faceplate £10 All in reasonable...

Does anyone on here have a Laserpro Spirit SI? I'm looking for some technical advice on setting up the print driver.

A selection of 1 MT drives, a basic pen mandrel and a chuck arbour. The larger of the two ring drives is hollow and has a removable pin for use with a lamp auger. £15 SOLD for the lot including postage

K100 / Clubman woodturning chuck with 3/4" x 16tpi thread. Comes with long chuck key. £105 SOLD inc. postage

I am trying to put together the programme for my local woodturning club (Forest of Dean Woodturners) but over the last couple of years, quite a few demonstrators have stopped travelling. Can anyone suggest any names within a reasonable distance of Gloucestershire who might be willing to do an...

ALL SOLD K100 chuck with 1"x8tpi thread. Comes with chuck key & jaw carriers. £100 150mm button jaws. As new condition £40 Internal/External engineering jaws (these are the old type that are steel and come with integral jaw carrier - much better than the new aluminium ones!) £40 The jaws...

Lathe for sale with 27"bed extension, faceplate, spanners, manual and tool rack. 1"x8tpi spindle thread 550W motor 457mm between centres 305mm max diameter over the bed Excellent condition. Located in the Forest of Dean, Gloucestershire. I also have a chuck for sale which fits this lathe...

I've had a bit of a sort out (usual story - too much wood and not enough space!) and I have an assortment of turning spindles (plus one bowl blank!) between 1-2" and a few odds and ends. All in good condition but surplus to requirements. Prices exclude shipping which will depend on weight etc...

All now sold. Three pairs of Record heads on 40" wooden bars. £30 Two Vedac 40" clamps £30 One Woden 36" clamp £15 All six for £60 Collection preferred. Located in Drybrook, Forest of Dean

Record 53P vice. Good working order. £50 Record 52E vice. Quick release. Old style with dust guard over thread. Good working order. £65 SOLD Collection preferred. Located in Drybrook, Forest of Dean.

I got these chisels amongst a load of tools I recently bought. Are they for woodworking or masonry/stone? A couple of them have Marples brand on them and the previous owner was a carpenter which made me wonder which these are. There were some other interesting tools in the collection so I may...

I have a 1" x 12tpi backplate for an Axminster super precision chuck (or a versachuck). Before you get too excited - it's left hand thread. It could potentially double up as a 4" faceplate. If it's of use to anyone, it's yours for the cost of postage.

All now sold All Tormek brand - Square edge jig £25 Carving gouge jig £12 Woodturning gouge jig (SVD-185) £35 Short small knife jig £15 Long small knife jig £ £15 (both the above two are fundamentally the same jig, just different versions) Double sided stone grader £10 Anglemaster £12 Turning...

Microclene hanging air filter 90W Replaceable filter £100 Located in the Forest of Dean, Gloucestershire

Yorkleen WV2 twin motor dust extractor Dust extractor and ducting included This is a powerful dust extractor, ideal for connection to lathe, bandsaw, planer etc. Inlet 4" diameter. Ducting included SOLD

1 Morse taper revolving live centre system. Multiple tips including a narrow point centre; large point centre; cup centre; cylindrical centre; ring centre and a hollow ring centre (with removable centre) for boring lamps etc. £60 including postage.

The AWGB virtual Seminar takes place on the 13th and 14th of November. There are 12 international presenters, discussion and breakout sessions and some trade sessions too. The demos are available to watch for 30 days after the event and the total cost is £65 (£50 for AWGB members). More info on...