Search results

Another vote for water

If it was in South Derbyshire then it was probably me

Connect to Zwift ... Much better experience and its keeping me sane

I got some of them 4 weeks ago ,, Box did not last a week ... Total rubbish... bought from Screwfix Used to screw ply to temporary hoardings through pre drilled holes in the ply... Went back to cheap eurber ones and still on the same bit

Its a small place Jacob... But its in some nice country and they do have some beautiful bits of wood there... Definite recommend from me Cheers

https://www.scawtonsawmill.co.uk/ Never had an issue with any of the wood I've ordered but then again I drive up and collect it lol I do believe that they do a delivery service

Its not just Coalville . Its Also Ashby, Swadlincote, Repton , Measham , Burton and Chaddesden I first heard of it probably 8 - 10 months ago The street behind me had two broken into during the day. One was as the Guy was getting his Kit out..

As above Too dark

A speed Boat

They usually just sit on the worktop if fitted over a base cabinet with a couple of fixings to stop them toppling over . If no base cabinet under the worktop then they are secured to the wall like any other wall unit but they do rest lightly on the worktop

https://www.youtube.com/watch?v=Kq-luuLB7Lc Follow the link above and substitute the ruler for the lump in your hand...... Note the two marks on it

Steel

The bottom part is the stand and the clasps hold the two parts together so the machine is at a comfortable height for working.

Yes you need to remove the fence on the fence you will see two rods that go down into the rings on the fixing bracket as per the attached photo with the arrow Grab the fence either side as close to the pins as possible and pull straight up. if you wiggle the fence it will jam lol . Some times...

Another one looking forward to the review lol I still cant make my mind up LOL

Hi Lons I'm currently is the same position looking at getting a new saw as my trusty Dewalt saw is getting a bit long in the tooth. I've had a play with the Makita ,Dewalt 780 ,Bosch glide 12" and the Kapex. Over the course of the last week I've ruled out the Kapex and the Makita The Kapex...

There is an adjuster but it makes no difference unfortunately. to eliminate the dent you have to adjust the pressure so the nail head is proud of the timber. Then use a nail punch to drive it fully home which kind of makes a mockery of the nail gun in the first place. Yes you could use steam...

It will always leave the dent if you are only firing in the brads . If you fire in the staples it still leaves a slight dent but its not as noticeable. My work around was to accept it and only use it on areas that it doesn't matter lol and where it does matter I got a Dewalt air nailer the...

Bendy ply.

Very nice work What paint did you use ??