Search results

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

  1. Tugalis

    DIY Overhead crown guard with dust extraction.

    This is a project that I have needed to make but put off for around 18 months now. In our old workshop we had a huge gas furnace heater so never had an issue with opening the roller door when carrying out a lot of timber cutting. Now we rely on a wood stove the heat isn't as instant so we ended...
  2. Tugalis

    Inflatable Drum Sanders - Bench or Floor mounted

    Hi, We are need of a an inflatable drum sander. I thought it would be a world easier to find something but I am struggling, am I looking in the wrong place? We currently cut boards down, use a bull nose router bit to round the edges over and then sand them using a palm sander to make the edges...
  3. Tugalis

    3 Phase hard wiring....

    Hi, So I've got a Felder AF22 3 phase machine I picked up and looking to install it into the workshop. It's doesn't have a cable with it so I just assumed I could pick up some cable and a 5 pin female plug, wire it up and I'm good to go.... The breaker box in the workshop doesn't have a...
  4. Tugalis

    6" PVC Ducting for extraction system

    Hi, Im just about to purchase my PVC ducting for the new workshop but wanted to run somthing past you guys before I do. Ideally I would use metal however due to costs I am going to stick with the 6" PVC ducting. Ive been reading Bill Pences website for the last week or so and I dont really...
  5. Tugalis

    Panel Saw - Limited space..what to buy

    Evening Ladies and Gents, We are upgrading our table saw in the workshop. Currently we don't have a huge amount of space however we will be looking to move into a unit in the spring. At the moment we use a HEAVILY modded ts-200 unit with a custom fence, large in-feed and out feed tables. It...
  6. Tugalis

    10" Charnwood/Axi/Record etc saws. Removal of base...

    Hi, Has anyone on here removed the bottom portion of the base from the above saws and then mounted it onto a cabinet/bench? I've got a TS200 which isn't up to scratch for what we need any more so looking to upgrade. Space is at a premium so we have the ts200 sat on a 7 x 3 work bench. I...
  7. Tugalis

    Dust extraction - 63mm / 2.5" Using Camvc

    Hi, Bit of a Noddy question so bear with me.... I recently bought a camvac which I extremely happy with. I went for the 2.5" outlet as it was a little cheaper and in stock which is quite a feat for a camvac it seems. It took ages to find a supplier in stock but they were great with helping...
  8. Tugalis

    Inca Euro 260 blade tension

    Afternoon, I have been using this saw for a while (spanking bit of kit) and haven't had a problem with blade tension as I normally set it up by ear? As in the noise the blade makes when you twang it shows if it is tensioned enough lol, but I am sure this is not the correct way to do this. The...
  9. Tugalis

    Help....where to buy slotted type lid stays?

    Hi, I'm at a bit of a loss, I have been asked to build some bits for a customers garden however I'm stuck trying to find a slotted type lid stay. I feel a bit daft if I'm honest as I didn't think it would be that hard to find but I am struggling!! http://www.nagaroot.com/forum1/files/th ...
  10. Tugalis

    Steel/Ally strength for a Biesemeyer style table saw fence.

    Hi, My Mrs runs a small furniture making shop and has asked me to build her a Biesemeyer style fence and rails. The majority of plans I seem to find ask for 16 guage steel for the rails and steel plate for the T section of the fence. I was hoping to use ally extrusion for the actual fence so...
  11. Tugalis

    Another small bandsaw advice request...Please :-)

    Hi, First off....I love this forum!!! I've been coming here for the last 18 months reading advice on all sorts so thanks! I currently help my Mrs run a small woodwork shop, I'm a surveyor by trade so can be a bit of a stickler for build quality and tend to buy the best we can afford when it...
Top