Search results

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

  1. ola c

    My latest jig creation

    Here's the video for the odd millimeter ones.
  2. ola c

    My latest jig creation

    Started working on the plans, 3d CAD completed but will still take a while though to complete the plans. Today I made a new discovery.. using all 4 pins this jigs cuts boxjoints on odd millimeters just as simple as it does for even millimeters. In the videos I say it cuts boxjoint on...
  3. ola c

    My latest jig creation

    Hi, Think there might be some interest in this. Used it a few weeks now and as it's name implies, it certainly is a superjig for tenons and boxjoints. I call it a gamechanger and that's what I see it as. Developed for the table saw but could be used on router table as well as long as there's a...
  4. ola c

    Router table and router with lift

    I really hated that Triton switch lock. Have my router permanently in the table and the switch lock was just annoying. Good news is that it's a quite easy operation to remove it. Just make sure to not start the router in the top, locked position, after the switch lock is removed. That's easy to...
  5. ola c

    Router table and router with lift

    Another Triton TRA001 here. Not 100% satisfied, first one vibrated like crazy out of the box, got a replacement that are kind of OK but still vibrating too much to run really large bits in the router table. Anyway, if having a router with built in lift (like the Triton), I see no advantage of...
  6. ola c

    Hammer A3-31

    Well...the fence needs to be towards the forward position (at least over half the tables width) when tables are lifted, otherwise the cutter guard on the backside crashes into the cabinet and bends. Only major design flaw I found. Minor is that the knob for adjusting the cutter guard height is...
  7. ola c

    Axminster Ultimate edge

    I gave away my Tormek after I purchased a Pro Edge. Had a PMW11 bevel up iron that took forever to grind a new bevel on the Tormek and after that I gave up. Anyway, I have modified my Pro Edge with a 12mm bar to acchieve some functions (using Tormek jigs) seen on the Axminster version. If the...
  8. ola c

    Robert Sorby ProEdge Sharpening System

    Thanks Chris. I have a Tormek as well (which I won't use anymore) and had the round bar idea already from day 1 with the Pro Edge. Then when I saw axminsters version I decided to give it a go. Sorry but I can't produce and sell these, it wasn't difficult to build but my metal working machine...
  9. ola c

    Robert Sorby ProEdge Sharpening System

    Just made some jigs for my new Pro Edge, might be of common interest. The first one a square edge jig, more or less a copy of the one you can buy. The brown thing on the tool rest is low friction tape. I bought the PESQW when I bought the machine but I found that jig quite bad. Especially since...
  10. ola c

    Wadkin AGS 10 Affairs and Spares

    I attached the sheetmetal with double side adehesive covering the entire surface. Won't come loose in my lifetime :?
  11. ola c

    Wadkin AGS 10 Affairs and Spares

    Yes, 2 layers of 19mm (3/4") mdf glued together and template routed. Then the top was covered with metal sheet, edges painted same colour as rest of the saw. Did you scroll down to this pic? https://www.byggahus.se/forum/attachmen ... pg.170455/ If you look underneath the extension you have and...
  12. ola c

    Wadkin AGS 10 Affairs and Spares

    I had the same problem, missing one extension table. I Think they are symmetric (?) and decided it was better to have the original extension table on the right side. Anyway, I made my own to have on the left side, it's mdf same thickness as rest of the saw top covered with 1mm metal sheet. Looks...
  13. ola c

    Charnwood aftermarket rip fence

    So, now I finally decided to buy the fence its out of stock both at Poolewood and Charnwood...until september! :cry:
  14. ola c

    Charnwood aftermarket rip fence

    Great, thanks for info.
  15. ola c

    Charnwood aftermarket rip fence

    Finally someone who actually have the fence. I would be very thankful if you could take the time to post some pics of the cam interface and tell us more about materials and how rigid it feels. "Does anyone have additional info, which materials are the cam clamp made of and how does the clamp...
  16. ola c

    Charnwood aftermarket rip fence

    So you buy a right hand extension table and get an extra rip fence for free? Sounds very strange. Just checked with axminster, they answered fence is not included.
  17. ola c

    Charnwood aftermarket rip fence

    Thanks for the tip, but the extension is 113.80£ and that's without the fence. Even if axminster could make me some offer of long rail only + fence I expect it would be quite expensive.
  18. ola c

    Charnwood aftermarket rip fence

    Hi, Found this yesterday when I was searching for a new rip fence for my table saw https://www.poolewood.co.uk/product/cha ... -saws-psf/ Does anyone have additional info, which materials are the cam clamp made of and how does the clamp mechanism/interface look on the inside facing the front...
  19. ola c

    Wadkin AGS10 with a strange lever

    Is "Anders K" perhaps from sweden? If so, I think Stenbergs equipped the ags saws with that brake. Speaking about the riving knife, I made a pretty complete instruction (in english) on our swedish forum, a guy from new zeeland also asked me about it and I decided to make it public once and for...
  20. ola c

    Fitting a Kreg precision fence to Startrite 351E

    I was considering this for my bandsaw but went with shopmade fence. I think it's extremely strange Kreg didn't design that fence to be "flippable" in a high and low setting. Edit. Ooops, my bad. Now I remember. I considered to buy only the extruded part, which is not flippable. On Kreg's fence...
Top