• We invite you to join UKWorkshop.
    Members can turn off viewing Ads!

Search results

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

  1. M

    workshop scms stand info.

    Hi Paul, no problem feel free to ask any questions, I will do my best to answer them :) My thoughts so far on the LS1214 with work light: - I have owned the saw for about 21 months now and don't regret my purchase at all, in fact I wouldn't like to be without it. I have used it mainly in the...
  2. M

    workshop scms stand info.

    Hi Waka, Any chance of a picture as well?
  3. M

    workshop scms stand info.

    Hi Mike, thank you for the info, I think I might be better off making my own because I was looking for a stand a bit like a trolley with brakes that could be moved around the workshop with ease, maybe with a cupboard or dust collection underneath. If I needed to use the saw out on site I would...
  4. M

    Festool Lovers

    Hi Waka, I also have the body grip version and its excellent, and I would also recommend Lennox blades. Hope this helps :)
  5. M

    Cleaning Cast Iron Tops Info

    Hi, thank you for all your advice, I decided to try 400grit wet/dry with wd40 first and it worked really well, luckily the rust was only on the surface so it didn't need much work. Thanks again :)
  6. M

    workshop scms stand info.

    Hi, I have a makita ls1214 scms with axminster stand, however it does take up a lot of room and is very awkward to move around the workshop. Can anybody recommend a workshop mitre saw table/stand which has fold down wings for storage plus sturdy wheels for easy manoeuvrability. Or would I be...
  7. M

    Cleaning Cast Iron Tops Info

    Hi, I have some of this in the shed Autosol chrome cleaner (black and gold tube) which I have used it on my motorbike before. Would this work okay or would it be too abrasive??
  8. M

    Cleaning Cast Iron Tops Info

    Hi, thank you for the info, if i use wonder wheels or Autochrome metal polish do I need to wash off with water after use??
  9. M

    Cleaning Cast Iron Tops Info

    Hi, I have recently purchased a drill press with a cast iron table which has a few water marks and a few light rust marks on it. How would you recommend cleaning the top without causing any damage to the surface? :? Any info would be appreciated. thank you Michel
  10. M

    Festool Routing Template mfs 700 or mfs 400

    Hello, thank you for the replies :D . I do like the idea of the mfs because of the accuracy of the parts and at least you have the confidence that it will be square every time without adjustment. However the cost of the mfs compared to making some jigs/templates is hard to justify...
  11. M

    Festool Routing Template mfs 700 or mfs 400

    Yes Alf good point :oops: , i have amended my post above. cheers Michel
  12. M

    Festool Routing Template mfs 700 or mfs 400

    Hello, Just wondered if anybody had used this template. In theory it seems like a good idea. I assume it would help reduce the amount of homemade templates you would normally keep/make in the workshop. http://festool.safeshopper.com/456/385.htm?706 Any info would be appreciated Thank you Michel
  13. M

    Belt & Disc Sander Advice

    Hello, Can anybody recommend a good quality bench or stand Belt & Disc Sander. Thank you Michel
  14. M

    Dewalt DC618KA Cordless nail gun

    Hello, Has anybody used or seen in the flesh the new Dewalt DC618KA Cordless nail gun. I have read a few reviews in GWW etc. They all seem very positive, plus no gas or air required. http://www.dm-tools.co.uk/store/browse.php3?section=6003&sn=DEWDC618KA&main=&cs=&level=5 Any info/views would...
  15. M

    Festool Planers

    Hello, Just wondered if anybody had tried / owns or has an opinion on the Festool power planers either the EHL65 or HL850 Planer. Any info/opinions would be helpful. cheers :D Michel
  16. M

    Yes, another battery question

    Hello Duiker, Bosch, Makita and De Walt have a good range. http://www.dm-tools.co.uk/store/browse.php3?section=4539&sn=DEWDC984SA&main=&cs=&level=5 http://www.dm-tools.co.uk/store/browse. ... s=&level=5 http://www.powertoolsuk.co.uk/webcat/de ... 24V&ID=688 Regards Michel
  17. M

    Festo Plunge saw

    Hello Mike welcome to the forum :D I have the TS55 with guide rails as well (purchased from Protrade). I agree with the above comments. Its a GREAT piece of kit. You definitely won't be disappointed. When I purchased mine Protrade had the best deal. Regards Michel
  18. M

    Kreg K2000 Propack Pocket Hole System

    Hello, I have spoken to Martin Brown at Brimarc and it seems as though they have been experiencing problems with their e-mail. Seems to be all sorted now. I will let you all know what the kit is like when it arrives. Thank you for all the info :D . Regards Michel
  19. M

    Kreg K2000 Propack Pocket Hole System

    Hello Tim and Chris, I will give Brimarc a call on Monday, thank you for the info. Regards Michel
Top