• We invite you to join UKWorkshop.
    Members can turn off viewing Ads!

Search results

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

  1. seaco

    Axminster Bench Mortiser

    Axminster Bench Mortiser in excellent condition had very little hobby use hence the reason for sale. £150.00 Any questions please ask!
  2. seaco

    Evolution Saw Mods.

    I have one of these saws and very good it is but I found moving the fence to 45 degrees and checking it each time a pain so I made a triangle that I just pop over the fence so I can leave the fence at 90 degrees works really well. Then I found holding short pieces to cut dangerous as the clamp...
  3. seaco

    DIY Vertical Panel Saw Work in Progress (with pics) UPDATE!

    I have recently sold my large table saw to make some room in the workshop, I have decided to have a go at making a sliding vertical panel saw so here is a few pics of work in progress. And so it continues! And so it continues!
  4. seaco

    Axminster Plus 4300 Bandsaw loud Noise when Stopping??

    Hi All, I have an Axminster Plus 4300, which since new has made a loud droning noise only when the off button is pressed, I contacted Axminster to be told that this is normal and is the brake in the motor so I lived with it assuming it was normal but I am now wondering if what they said was...
  5. seaco

    Delta Tenoning Jig (SOLD)

    Delta Tenoning Jig, perfect condition little hobby use. £60 plus P+P See here if your unsure of their use: https://www.youtube.com/watch?v=CaRCxSBoh1I
  6. seaco

    Craftsman Molding Head Set, use on table saw. (SOLD)

    Craftsman Molding Head Set, use on table saw. Has ten sets of various shaped blades all appear unused all I have done is clean them up. 5/8” arbor but could easily be bored out to a larger size. £40 plus P+P
  7. seaco

    Osbourne EB-3 Mitre Gauge (SOLD)

    I am selling my Osborne EB-3 Mitre Gauge it is in excellent condition, only having hobby use. Please see the Youtube link below if you are unfamiliar with this brilliant gauge. I am only selling as I have sold my Table saw. £80 plus P+P https://www.youtube.com/watch?v=Uj5WQTual14
  8. seaco

    Delta Unisaw X5 single phase 240v SOLD

    Just asking whether anyone would be interested in my Unisaw I have owned it from new and it has only been used for hobby use no heavy cutting at all, everything works as it should to include outfeed table Dado blades and about four blades. Any questions please ask...
  9. seaco

    Table Saw to Panel Saw??

    I have a Delta Unisaw and out feed tables etc, but this does take up a fair amount of space in the workshop so I have been toying with the idea of making a decent vertical sliding panel saw. I am trying to think of most of the pro's and cons of this decision, now for my question what more can...
  10. seaco

    No words!

    Just had to share!... https://www.youtube.com/watch?v=8lMQmJy2VW0
  11. seaco

    Trend Airshield Pro Battery Problem (UPDATE)

    Trend Airshield Pro Battery Conversion (UPDATE) My Airshield’s battery has let me down once again it’s the second I’ve had and at £45 each I wasn’t too happy and it seems it’s a common problem that the batteries die over a matter of months mine has lasted about a year and now dies after about...
  12. seaco

    Trend Airshield Pro Battery Problem?

    Hi All I have a Trend Airshield Pro and the battery is knackered lasts about half hour from a full charge, I have been looking and you can replace the cells in the battery (I don't fancy paying £40 for a new one) so I've been looking and the cells are Nimh 1.2v 3600mha X3 so 3.6v but on looking...
  13. seaco

    Another successful electrolytic derusting project!

    Err, OK so I took a chance and bought an old KURT 6" vice and if you know anything about vices you'll know KURT are bloody expensive I could never justify buying a new one but this one came up on Ebay and I thought I'd take a punt... This is how I picked it up... So into the electrolytic...
  14. seaco

    Latest project, Saw Blade Sharpener...

    I put this in the metalwork section but it spans both so I thought you may like to see it here also! I don't know about you but I'm finding getting saw blade sharpened is getting pretty expensive plus it's a 40 mile round trip for me twice as I have to leave the blades and then collect three...
  15. seaco

    Latest project, Saw Blade Sharpener...

    I don't know about you but I'm finding getting saw blade sharpened is getting pretty expensive plus it's a 40 mile round trip for me twice as I have to leave the blades and then collect three days later so I thought I know I'll make a sharpener, so this spans woodwork and metalwork! I bought an...
  16. seaco

    Advice on a TIG Welder Please...

    Hi All I was hoping someone could help, I have the chance to buy a second hand Fronius TransPocket 1500 MMA/TIG welder, the problem is I've never used one TIG is something I've been wanting to learn for quite a while but I'm unsure if I should go for one of these or a more standard type of TIG...
  17. seaco

    Not woodwork I know, advice on a TIG welder!

    Hi All Hope you'll forgive me I realise it's not woodwork related but I was hoping someone could help, I have the chance to buy a second hand Fronius TransPocket 1500 MMA/TIG welder, the problem is I've never used one TIG is something I've been wanting to learn for quite a while but I'm unsure...
  18. seaco

    Facebook VMC 626 Milling Machine Group Started

    Hi All I have started a group on Facebook for all variants of VMC 626 milling machines and it's just started to pick up pace so if anyone here is interested in joining you'd be very welcome... https://www.facebook.com/groups/234955060029383/ Lee
  19. seaco

    Fitted my DRO

    Over the last few days I've fitted my DRO thought you may like to see!
  20. seaco

    What do you mean it could be dangerous???

    Unbelievable!... :shock: http://www.youtube.com/watch?v=unmYI5ru ... creen&NR=1
Top