• We invite you to join UKWorkshop.
    Members can turn off viewing Ads!

Search results

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

  1. A

    Chinese Lathe woes

    I doubt that this is a safety feature. If it is then there are better places to put such a feature. As this is a belt driven lathe then I would expect that the belts would slip before damaging steel gears. Also, the headstock gears drive a shaft to the outside and another train of steel gears...
  2. A

    Chinese Lathe woes

    About 12-13 years ago I was living in South Africa and purchased a Chinese 3 in 1 lathe, coded HQ500. Some years later I returned to the U.K. and brought it with me. It has done well for me ( very light use ) until about 1-2 years ago when the auto feed stopped and the auto feed speed change...
  3. A

    Triton TPT125

    I, too, have the same problem, with my Triton thicknesser, of the blade height changing while the machine is running. It only occurs during the times when no wood is being put through, that is between pieces, which is a bit annoying if you are trying to get several pieces to the same thickness...
  4. A

    Where can I get Earlex HVLP needles?

    If they are available from Rockler then Silverline here in the UK import and distribute Rockler stuff. Maybe they could include one/some in any shipment from the 'States. Worth a try. Nigel
  5. A

    Sources of kiln dried hardwood less than 1"?

    Try these: https://www.exotichardwoods.co.uk Nigel
  6. A

    Router Springs

    The Triton routers specifically say to remove the spring when fitting to a table so I guess that it will be O.K. with your chosen router. One has to be careful with the Triton's or the spring will come out at a high speed and could cause some damage if it hits you in the face. Presumable other...
  7. A

    12-letter timber

    Massaranduba https://www.trada.co.uk/wood-species/ Nigel
  8. A

    Has this blade any other uses

    When drilling plastics, particularly brittle ones, it is recommended to just touch the cutting edge of the drill to the grindstone to make the drill have a scraping action rather than a cutting action. It would appear that your saw blade is for cutting UPVC in much the same way. Nigel
  9. A

    Router for table

    +1 for the Triton. Had one ( TRA001 ) for years in my table. The Triton doesn't need a router lift as it has one built-in. You just need to drill a hole in the table for the handle which comes with the router. If you go for another make check that it will be easy to change bits while it is...
  10. A

    Clamp recommendations

    That is a new addition that my Bessey's don't have. Must be a change due to the competition:) Nigel
  11. A

    Clamp recommendations

    I have both Bessey and Axminster trade clamps. I think that these are probably manufactured by the same factory ( in China?) as the Bessey clamp extenders fit the Axminster perfectly. The Axminster has one advantage over the Bessey in that the handle can be swiveled round to provide extra...
  12. A

    Timber planing service around London

    You could also try any local Men's Sheds. Some will have P/T's that you could use if you can wait until they open up again. My local Men's Shed has one but then I'm in Somerset and it is closed for the duration. Nigel
  13. A

    Dobsonian Telescope

    Hi Sandip, I have made many dobsonian telescopes, including the mirrors.:) I have been a member of "Stargazers Lounge" for 10 years and suggest that you join, Stargazers Lounge. It is U.K. based, there are many reports to read and plenty of good folks there to help you. Nigel
  14. A

    How well does a Collet reducer work?

    I have an old Triton router with a 1/2" collet and the 1/2"-1/4" reducer. No problems with it and you can still get these from here for £7 ish: https://www.tritontools.uk.com/routertra001sparespricelist.html Fits any 1/2" collet. Nigel
  15. A

    My homemade router table

    Actually it is a safety feature. Safety for both the operator and the router. The spindle lock is progressive as the router is raised and it is possible to have the shaft apparently locked when it is only just engaged. I had a problem with my first TRA001 ( an older design than current models)...
  16. A

    Which router for oak?

    One thing that I forgot to mention is that I have a number of Triton products. As such I have had reason to contact them for faults a couple of times and their service has been exemplary. No quibbles and very quick resolution of the problem ( days). I have no association with this company other...
  17. A

    Which router for oak?

    My first router was a basic one from Screwfix ( FERM brand, I think it cost about £30 ) 20 years ago and it did all that I asked of it. That was joined by a TRA001 and table 13 years ago and is still going strong ( the FERM one eventually had a bearing failure and was binned ). I now also have a...
  18. A

    My homemade router table

    I do not understand why some people have a problem reaching under the worktop to operate the router switch. There have been some comments regarding removing the safety cover when mounting Triton routers in a table so that the switch can be left on while allowing the spindle to lock for changing...
  19. A

    My homemade router table

    I have had a TRA001 in my router table for the past 13 years and it is still going strong. It is an older design that doesn't have the through-table height adjustment unfortunately. I also have the JOF001 for hand work and our Men's Shed had the MOF001 in their table. As you have now ordered...
  20. A

    Source of switch for old 'FERM' router

    I had one of those but a bearing failed so I ditched it. However, there are many routers from the same stable to the same design so look for something similar that is still available and see if the switch for that one is suitable and available as a spare. Nigel
Top