Search results

If anyone has an interest in the Bosch PDB 40 drill and has (or knows somebody with) an Amazon Prime account, they're on offer for £188,- today. Cheers! Ferenc

I helped my wife’s cousin clear out his mums house after she sadly passed away, amongst all the stuff that was going in the skip was a bucket of his dad’s rusty tools, most of it was junk but there were a couple of rusty planes and a split wooden one as well. After cleaning one of the planes it...

I've just got myself a s/h Jet jbos bobbin sander, it's all cleaned up and humming away nicely, it will need a couple of new sleeves though, 1 1/2" and 2". I had a look on the Axminster website and the prices looked a bit steep to me, is there another quality alternative that I can use? Would a...

I’ve just bought a Wolf ES14 drill stand (cause it was cheap) and found out that my Bosch drill has a 50mm collar that doesn’t fit, it needs to be 38 or 43 mm. Can anybody recommend a drill for this stand? It needs to be lockable variable speed (not trigger sensitive) and with a fairly short...

Hi folks! I have a problem with the original fence on my Startrite 352, if the fence is about 100mm away from the blade and I tighten it, it stays straight, the closer I move it to the blade, the more the end of the fence moves while tightening. I could also see the rail move away from the...

Gents! I am looking for a fine filter cartridge to fit a Record Power CX2600 that I'll be picking up this weekend. I'm usually pretty good with Google but still haven't found what I want yet. Anybody have a supplier name or filter suggestion? Cheers! Ferenc

Hi all, I want to upgrade my cheapo mitre saw for something that is and stays accurate once set up and has a 12” blade. My searches on t’internet have left me with 3 options: 1- the Bosch GCM 12 GDL 2- the Makita LS1216 (or 1219) 3- the Dewalt DWS780 Once it’s installed indoors it’s not going...

Hi all, I am getting ready to install a wooden floor on top of the concrete slab in my garage, I'm going to use the Cabershield 22MM chipboards that come with a finished top coating. My plan was to batten the floor with 50X50 battens at 300MM centers, put 50MM PIR boards in between and put...

Hi guys, I got my hands on a Startrite 352 bandsaw and I'm in the process of taking it to bits for inspection, cleaning lubrication etc. I noticed that the tires are flat, is this ok or should they be crowned? There is also a bit of damage to the table where the blade has eaten a bit into one...

Hi guys, New member to the forum here! I've been looking around on this forum for a couple of months and picking up tons tips and tricks (thanks everybody!) I've been lucky enough to get my hands my neighbors stone built outbuilding (4,8X5 meters internally) with a pitched slate roof, until...