Search results

Hello Leo....... I have made heaps of clocks (with inserts) over the years and most of the inserts I have bought off The Wooden Teddybear. Prices are pretty reasonable. Standard 50mm ones are around $8.00 US. (plus postage, of course, but I found that pretty reasonable too)...

I am in Australia and my saw is called a Trupro - but it is exactly the same as your AWFS 18. I have had it now for about 5 years and apart from 2 tiny problems has not let me down at all. I do a LOT of work with it, most of it fretwork so it is mostly inside cutting. I put the Hegner quick...

The type and size of the blade depends on a number of factors. Blades are numbered by size - #2/0 being basically the smallest and it goes up to (I think) #12. A rule of thumb supposedly says that there should be at least 3 teeth in the workpiece at one time. It also depends on how intricate the...

Steve Good has a piece of software that tells you. http://www.scrollsawworkshop.blogspot.com.au/ Noel

Hello........I am in Australia so can't give a lot of advice about saws but I do have a Trupro saw which is the same, I believe, as your Axminster FS18" - the so called Hegner clone. I have had it now for about 4 years and regard myself as a heavy user. The only problem with it was 2 small...

First of all there are pinned and plain blades - what does your saw take? Then, the type and size of the blades you need will depend on the work. The more intricate the work, the smaller the blade you will need. The bigger the blade the less sharp they will turn. The brand of blade is a personal...

Great work Puzzler. I made a similar one a while back but it isn't as ornate as yours, or as well finished I don't think. Well done!! Noel

For anything intricate I use Olson skip tooth reverse blades. If the timber is less than 6mm, the 2/0 ones. For work that is not so intricate I would use #2. As an example, the project above I wold have used #2. I find the Olsons turn a lot better than the others and are less aggresive. For more...

I'm more into the fretwork type of projects, like boxes, small tables etc. I once made a totally wooden clock that gave a lot of enjoyment as well as a LOT of frustration!! lol. I have it adjusted now so that it's accurate to within a minute or so a day. This is a pic. I think one of the most...

I use a spray on temp adhesive and then use mineral spirits (also known as white spirits) to remove it. I also use self adhesive photo paper a lot - starnge as it may sound, if you keep look out it is not as expensive as it sounds. Noel

I thought I would post another photo. Made this a little while back and it's a 3D plaque made from marine ply. I stained some pieces, and others I left natural. Noel

Thank you for your comments. All 3 patterns are from Fine Scroll Saw. He has some fantastic patterns and are a bit different from the usual.They can also give you a bit of a challenge, lol. Noel

Lol, okay........here is a few more of mine.

I meant to add that it is finished in 3 coats of Rustin's Danish oil. Noel

I HAVE A Trupro saw. But that's here - in the UK I think they are sold as an Axminster?? (attached a pic). I have used a few saws over the years, but it's by far the best, in all respects. The timber is silkwood (I think a type of maple, but don't quote me on that). Because the timber is only...

I thought I would show a recent project of mine. The pattern is one of Fine Scrollsaw's. I have seen other Eiffel Tower patterns, but none come near Pedro's for realism. I think the only real challenge was the long 45 degree bevels on the legs. All the rest was simply cutting a LOT of holes ...

Thank you. I looked everywhere except down there! lol. Noel

Hello..........I have been trying to work out how to post photos, but fail everytime.lol. Can anyone please enlighten me? Noel

After all that waffling on about my saw I thought I'd better make sure we are talking about the same type of saw. lol. This is a link to the makers of my saw - is it the same type as yours? http://www.trupro.com.tw/product.php?mo ... 57&pid=506 Noel

I have a Hegner look-alike (as they call them here) but I'm in Australia, so they are probably under a different name to there. Mine is called a Trupro and there are other names as well. Problems? Well, to be honest I haven't had any at all and I have had it now for about 4 years! I have had...