Search results

Yes I still have it it is very heavy shipping will be costly its up to you

I have one I no longer use if this is gone

You should have a dpc below the frame stops the rising damp rotting the frame

I would use 25mm celotex on the walls tape the joints this will provide insulation and damp proofing in one go then fix 11mm osb over the celotex stagger the joints use 100mm masonry screws through both layers no need for any battens you finish up with a nice boarded wall perfect for fixing on...

I was given a in 125 000 btu industrial gas space heater a couple of years ago it heats my 700 sq foot workshop to 20 degrees in less than 5 mins i then maintain the heat with a electric fan heater works a treat

Is a single point fence a better way or not

I am thinking of changing my mitre saw to as a space saving exercise to the bosch axel glide Is there someone out there who can tell me the measurement from the back of the saw to the face of the fence so I can compare it with my existing sliding rail version I just want to know how much extra...

I have a C331 I have 2 fences a short one for sawing and a planer fence they are a great machine accurate and easy to use you won't regret buying one

Method 2 works for me just done some for my daughter all stayed flat

The problem is the oven temperature setting alters from say 190 to 275 you then shut the door and the oven then will heat up to the higher figure 275 this happens when there is a lot of steam AEG say this is normal You then have to reset the setting to 190 or the food will burn

We have a AEG touch control oven if you open the door during the cooking cycle to check progress or add some veg occasionally you get a lot of steam this will alter the heat setting ie 190 to 275 shut the door and the oven continues to cook at the higher setting (you then burn the food ) the...

I use mine a lot dowels are cheap accurate and easy to use

Pity non of you live close to me I usually have more than we can eat Cod ****** Plaice a few Turbot and Brill Mackerel by the hundredweight Gurnard are realy good to eat if you get the chance I brought 1 ****** home last week it fed me my wife my daughters family (4) my sons family another (4)...

Put some A 142 mesh in the slab

Yes I eat it maybe 6 times a year The rolls royce of flatfish very expensive possibly the finest eating fish in our waters we would mostly pan fry it as we like it that way I only eat it because my other hobby is sea fishing and manage to catch a few each year the cost will hurt the wallet...

Yes done that proper powerfeed though three rollers the rollers need to be on the outfeed part of the planer to work well

This is mine a road cone a length of 150 mm pipe and a plant pot cheap and cheerful works well I have a 40 gallon plastic drum as a container

I made something similar for my daughter used 18mm for everything joined it all together with dowels heres the link ikea-style-storage-unit-new-pics-added-t41427.html

+1 for the hammer great bit of kit

Hi Bern E Bay is the Place just hope it's close enough to pick up I had to drive about 30 miles John