Search results

I have an unopened roll of Tyvek breathable membrane and a 3/4 remaining one if its of any use to you (or anyone else that wants to collect it).

Thanks for the suggestions. I might change my design so that I can use side mount runners instead. For full extension they take all the weight in the right direction.

Hi Can anyone recommend a full extension runner that fits underneath rather than to the side of a drawer ? Cheers

Crikey - can't believe how affordable all the stuff on that page is - https://www.fine-tools.com/otoro-t-tracks.html

The real question is why does your utilities provider take 3 months to give you back the 800 quid they over "estimated" over a 12 month period. And this is after getting the ombudsman involved. The entire services industry is all about scamming you.

I've since had a LED driver fail after 30mins use :( There's a replacement in the post.

So I bought 6 1200x600 60W 4000k Daylight panels and made a simple frame to hold them up. I wasn't sure if I had enough or too many but I think it's just about perfect. Since taking these photos I've finished cabling it back to the house and had a sparky check it over so theres no extension...

Did you use a surface mounting kit or make your own ?

Does anyone have any experience with these very thin flat panel LED ceiling lights ? I've need some to light a 6m*5m space and any recommended solutions would be appreciated. Cheers

There's also the flat rate VAT scheme but it may not suit your expenses/invoice ratio.

Whereabouts in the Midlands are you J_Ashley ?

I have a RP BS350 and have designed and 3d printed some replacement inserts - https://cad.onshape.com/documents/30af7 ... ec02f6544e Printed with the top side on the print bed gives a great smooth finish -

You can't call those things sheds. They use 1"x1" - that's basically trim. I thought they were bad whey I was looking for a new shed and was looking at the ones that were 1"x2". I halped a mate put one of these 1"x1" sheds in and it might as well have been made out of cardboard :O

Some Fords are stealable within seconds - without setting off alarms and rendering the immobilisers pointless. They put the ODB port within arms reach of the quarterlight window. All it takes is a small broken window, a reach in and plug in to the ODB port and the entire car or van can be...

Ditto for these - you'd be lucky to get one clamp out of them.

These look the same as the cheap ones from screwfix etc.. We've discussed these elsewhere. The handles snap far far too easily (I broke 2 in first use) - I'd avoid.

It is - and it's very nearly done ;) Just a plaster skim and SWA to run down to it. Oh and I need to source some thin light panels.

I used the rubber4roofs thickest option on a 6m*5m roof and 2 of us could barely lift it :o I had to fashion a slope and a trolley (with self applying brakes!) and pulled it up bit by bit. This picture tells only half the story - the slope was too steep for the rubber (I'd had no problem...

A proportional content size allows the user to choose the line length by simply resizing their window (admittedly hard on a tablet). I'd be in favour of choice every time. I personally can scan a screen of text very quickly so I like to see as much of it as possible. It means I don't have to...

I haven't misquoted anything. I asked you a straightforward question - you are advocating that changing the current page margins to relative widths would be a mistake and quoting "industry standard design" as your argument. Whereas I never suggested implementing a specific margin size - just...