Search results

Any interest in the below before I put on ebay, the dust extractor and grinder are collection only. Could post the Tools at cost. Record 200 (8") Bench Grinder with DIY rests, dressing stone and a Woodcut Jig for gouges £75 Set of Marples Tools £45 Record Dust extractor £55 Small crack in lid...

Looks awesome, just had a read through your main thread with much interest as I'm currently looking for the same machine for a similar project. If I find something suitable I'll be posting for help no doubt :lol:

Cheers bud, I'll have a look :)

Most likely an impossibility on my budget, currently have a Record CL4 and saw a Jet 3520b in Axy and fell in love, unfortunately my wallet can not extend that far so I've been looking round at an alternative. The heft of the machine, banjo and over all build has me wanted to replace the CL4...

Just an update, yes it was a loose pulley on the motor lol I had tried moving it but with the belt tension it wouldn't move, I had the belt off and sure enough it was sliding.

More problems, Went out tonight and there's a ticking noise coming from the actual motor, should I be worried ? Do I need to get it looked at ? Video of said noise https://dl.dropboxusercontent.com/u/986 ... .49.25.mp4

I think looking I've got to decide on an inset or overlay door ? and go from there. Just looked at the price of the domino xD not a chance lol Might buy a router attachment for biscuits

After some more advice, its a bit rambley sorry :lol: Wife has seen some alcove units and shelves and has put an order in :roll: We're due to decorate the room anyway so I thought I'd give it a go. Photo of said cove - https://dl.dropboxusercontent.com/u/986 ... .23.56.jpg We have a lot of...

I use Revit :lol: I do use autocad which is obv not free, you could try Draftsight if your just after 2D :)

If your friend is the one dealing with the client then surely he should have had a good set of drawings to price it ? I can't say from a builders point of view as I work for a structural consultancy, but if we were instructed on a job like this we would have had to visit site and would have...

I've just changed all mine, if you need any photos or help just shout. My internal lock nut came out no issue, used a piece of brass to knock it round in one of the notches. Getting the rear bearing and spindle apart was a nightmare, took a lot of persuading. Turns out the rear bearing was shot...

Little units an Ikea job, as much as I'd like to make everything I just don't have the time :(

I used some brackets that are screwed on, really good and not expensive. Will take some photos when I get chance

Finished, cant see any of my mistakes xD My Daughter is over the moon and wifey is very happy :)

Testing and fitting the slates Bed Room Had to be decorated xD Another distraction

Onto the tenons, I hate them... Really hate them, due to the fact I cant hand saw straight xD I did the bed legs by hand then decided to goto the band saw and table saw for the slates and they came out better than I could have cut but I was still not 100% happy, a shoulder plane ? might have...

My first major project after the workbench, i'm very much a beginner and although I'm happy with the end result there is much to improve on and many lessons to be learnt. I planed all the timber by hand, I really wish I'd had a thicknesser as I think have all your material at the exactly the...

Almost finished this bed, have made it out of redwood and I'm now wondering what to finish it in. Any suggestions ? I don't want a tint and want it to look natural, I was just going to put some beeswax on it but is there something else that might increase the surface protection perhaps ...

I've had one for maybe a year now, bought it used. Its one of the one's made in the uk before they moved manufacture overseas. Its not been a bad machine and a couple of the niggles I have with it have been sorted on the new machines. I personally am not keen on the bed bars and want to change...

Does look like it but it wasn't, found the second grub screw on the pulley which meant I could knock off the bearing. Rear Bearing had plenty of play in it and it looks like the bronze was at the end of adjustment as the slope of the spindle was making contact with the straight part of the...