Quantcast

Search results

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

  1. Neocleous

    Record Power AC400 Vs Axminster AC15AFS

    I went for the record power in the end, seems to do the job although I have to say the remote is rubbish I find my self walking up to it and trying every angle to get it to respond, not sure why. The unit it’s self though does the job.
  2. Neocleous

    Casters with retractable self levelling foot

    I’ll look into them as they look promising. This is kind of the thing that I was originally talking about. Link
  3. Neocleous

    Casters with retractable self levelling foot

    It doesn’t need to be one unit but the closest thing is Twin Wheel Adjustable Levelling Castors - Plate Fitting Spanner Operated (WDS 12199) I’d like something where the foot can be quickly raised out of the way so it can be moved then pushed down to re engage.
  4. Neocleous

    Casters with retractable self levelling foot

    Hi everyone, I’m looking for some casters to go on various workbenches in my workshop but I also need self levelling feet as the floor isn’t level. Has anyone come across an adjustable foot that you can raise and lower to engage the casters? I’m sure I’ve seen this but I can’t for the life of...
  5. Neocleous

    Record Power AC400 Vs Axminster AC15AFS

    Hi everyone, I’m looking at the two air filters in the title, I’ve seen a few threads on here talking about the AC400 and people seem pretty happy with it but I can’t find much on the Axminster model. Are there any opinions on one verses the other? On paper the Axminster seems to be a little...
  6. Neocleous

    Scribing Question

    Cutting a template makes sense. I have two painted infills and I think I can get both out of one so that gives me a little breathing room for whoopsies.
  7. Neocleous

    Scribing Question

    Hi everyone, I have a newbie scribing question. I need to scribe in a fillet into a wall that is at an obtuse angle so I cant use the offcut scribe method as I have on the opposite side where the wall is at 90. My thought at the moment is to take a few measurements along the length of the...
  8. Neocleous

    Large format MFT Plans

    That’s good to know, I thought MDF might be a problem. I think I’ll switch to birch ply for the top and put two horizontal extrusions to support it.
  9. Neocleous

    Large format MFT Plans

    Thanks for the comments, adjustable feet sound like a sensible idea. Ideal solution would be putting the brake on lowered a foot. Not sure if I’ll be able to find such a thing. One of my concerns is that the top may sag with the weight of the router although it is well supported. I was...
  10. Neocleous

    Large format MFT Plans

    Hi everyone, I am hoping to move into a larger work space soon so I have started looking thinking about my new workbench. I currently use an MFT and I love the functionality of it so I want to make a larger one with storage and a router table. I was inspired by the BF/MFT...
  11. Neocleous

    Ear defenders for Trend Airshield Pro?

    Hi sorry to bring up an old thread but I’ve just purchased one of these and I’m having the same issue. Did you manage to fin any that are compatible. I don’t want to use the ear plug kind I want to use over ear protectors. Thanks
  12. Neocleous

    Axminster Craft AC2305B Opinions

    Hi all, I’ve been thinking of getting a bandsaw for a while and I see the Axminster Craft AC2305B has £120 off at the moment. It seems to have mixed reviews but they seem older when the saw first came out. Does anyone have any experience of this saw or any other recommendations? Thanks
  13. Neocleous

    Blum drawer slide layout question

    I thought about spacers it's just a bit of a hassle. The jig just sets the correct distance from the face and has the correct hole pattern, the issue I have with it is the holes aren't in the middle of the runner and the jig isn't the same height as the draw runner that attaches to the carcass...
  14. Neocleous

    Blum drawer slide layout question

    Hi all, I have a couple of questions on laying out and marking for Blum drawer runners. I have a cabinet that I am going to fit three sets of slides to starting at the bottom and they are to be spaced evenly. I’ve worked out the distance between each pair of runners at 238mm. So far so good...
  15. Neocleous

    Melamine faced MDF/Plywood Supplier North West

    Hi everyone, I’m looking to build a cabinet out of a melamine faced board and I would rather the core was MDF or better yet plywood but I’m struggling to find a supplier from an online search. Does anyone know of a supplier in the North West I’m in Warrington so the closer the better. Thanks
  16. Neocleous

    Cabinet carcass glue up

    It's not strength that I'm worried about, It's more how to glue and assemble everything and keeping it all square, my thinking was that screws effectively act as clamps pulling everything tight and I can move onto another carcass.
  17. Neocleous

    Cabinet carcass glue up

    Hi everyone, I need to glue up some carcasses and I’m wondering how other people do it. The panels are 19mm veneered mdf boards and domino slots have been cut into the panels. The back is 19mm thick and cut to fit over the panels. The sides of the panels won’t be seen so screws are fine to...
  18. Neocleous

    How to accurately measure up for inboard dominos?

    I guess he used the 5mm cutter because the base is referenced to 10mm. I suppose with this method I could just use some 18mm stock as spacers and reference from that as I have a double thickness shelf.
  19. Neocleous

    How to accurately measure up for inboard dominos?

    Hi all, I have two pieces of laminated 18mm MDF making one 36mm piece and I have cut domino slots in the centre of each board, this is a centre self in a book case so I want the added safety of the double stack of domino's, also I'd like to know an accurate way to do this if there is one. I...
  20. Neocleous

    Table Saw buying advice

    Thanks for the responses guys, I missed the tool buying section when I posted this so apologies as I guess it is in the wrong place. I have two 1.4m tracks and the TSO joining bars that Axminster sells, It all works fine I bought some cheap parallel guides from a seller on eBay (Stans tools if...
Top