Recent content by woodturnerEric

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. W

    Carvers Mallet

    if you put a finish on a mallet depending on the finish and colour of the wood,the mallet could mark the wood your hitting,then you have more work re-finishing the piece,oh and before anyone says it,its not only chisels/gauges that are hit with a mallet,another thing,if a mallet has a finish on...
  2. W

    What to do with Church Pew

    microwave it if it`ll fit or woodworm killer from B+Q works well,then you have a piece with a talking point when finnished,cheers, Eric.
  3. W

    new lathe choice

    do you men the Axminster AWVSL 1000,if so,I had an ealier version called Perform CCVLB 1100 for 7yrs,which I was told by a few certain people was rubbish and I`d never get a piece of decent turning off,and would be impossible to do thin walled turning,well that was proved wrong made a goblet 1-1...
  4. W

    new lathe need bits

    sorry never heard of a Jet 1236 lathe,are sure you don`t mean a 1220 or a 1015 ?,as these are the small lathes Jet make ,cheers, Eric.
  5. W

    VersaChucks

    I`d suggest Oneway no. 3 Premium profiled jaws for big stuff on the VersaChuck,I`ve used them to hold pieces up to 27 inches(69 cm) across and pieces weighing in excess of 70lbs(33Kilos),I`ve had my VersaChuck now for 9 1/2yrs with no problems, clean it every couple of years and re-grease the...
  6. W

    Warning...Sharpening Thread

    I have to agree with Derek,I`ve been sharpening all my tools all my life(saws included),with a bench grinder you really must use a delicate touch,my turning tools are all done freehand and are as sharp as anyone elses using these overpriced systems,I admit I was lucky,my dad started teaching me...
  7. W

    Turning Chisels

    I`ve had my Axminster starter set for 10yrs now and still happy with them,though the bowl gauge and spindle gauge are getting quite short now,may have to replace them one day soon,cheers, Eric.
  8. W

    thought this was funny!

    that`s great,made me chuckle
  9. W

    New Toy Arrived!

    first thing I turned on my 3520B was a fifty pound log,then I made a miniature box and finial,just to see how it handled big and small stuff,had 2 years now,and still over the moon with it,enjoy your new toy to the full,Regards, Eric.
  10. W

    Advice Needed

    I had what they now call the AWVSL1000,was called CCBVSL 1100 when I bought it,I had the lathe for seven years before I upgraded and was very happy with it,the only thing I changed was the live centre,but they put one of their own on it now which is of a better quality,I`d go for this lathe,as...
  11. W

    Spalted Ash bowl.

    great save,lovely bowl
  12. W

    nervous new turner needs help

    try going on the AWGB site and looking up clubs near your location,you`ll get plenty of advice and help from them,cheers, Eric.
  13. W

    Ash NEB in colour.

    looks great to me,love the shape and the colouring,I think the foot is really nice,good to see a different design of foot to the norm,cheers, Eric.
  14. W

    Record DML24 Questions.

    if it won`t come out,try getting in touch with Record,they might give advice or ask you to send offending part to them so they can remove it for you,if the dead centre is that badly mushroomed,it might need a replacement sleeve anyway if the taper is damaged,might be worth just buying a new...
  15. W

    Droopy yew bowl

    nice bowl and well finished
Back
Top