Recent content by wallace

Some one showed a mask that had been left without dissasembly and cleaning on here ages ago. There was mold growth behind the cartridges near the diaphragms. Not good, I used to wide mine out with antibac wipes.

stanley blade in a holder followed by red scotchbrite

I quite like cleaning parts, I find it cathartic. A proper parts washer would be nice though

Early on I messed about with making my own mask, but instead of having a unit that filtered on my person. I had a pump that took fresh air from a clean source and fed a mask via a flexible pipe. I bizarrely used a miliatary fan that came off a cold war radar unit. It worked really well. Only...

The P3 in the half mask offers more protection irrespective of the P2 being powered, the thing is the half mask relies on the user moving the air whereas the powered one the air is being delivered by the fan. If you've ever used a mask that seals on your face for hours you will agree its not...

Its worth checking what protection you will be getting, some of the 'cheaper' models only have P2 filters. I've used the 3M dustmaster then the versaflo now I have the 6000 version of the versaflo which can take carbon filters for spraying. The older versaflos come up regularly and prices are...

Not 100% but I heard the hole at the bottom was for holding a referance template or picture. RS's are the favourite of production turners.

If you have a dial gauge put it on the register of the spindle, the bit that has no threads. If you get no runout then its not the spindle. If when you put the chuck on you get runout on the body of the chuck then its the chuck been machined wrong. That drive looks a bit battered, if you can...

Noel whereabouts is the museum

I collect huge lumps of wadkin machinery with them overflowing into the garden, everyone has there obsession. She has started taking over the loft room now.

Pretty much covered everything in the comments. The saw bench, spindle moulder and planer will make half decent money. Find the tags and check what each model sell for on ebay advanced. The planer looks like an RZ which are worth a decent amount £1500. AGS's sell well. Machine dealers will...

Wadkin were the first company to automate woodworking machines by the use of punched card control, and by the 70's were creating machines with early cnc. By the mid 80's the company was being asset stripped by every owner that came around.

I had a similar problem a couple of years ago whilst rebuilding a wadkin LQ which has a morse taper 2. I tried everything for 3 weeks. In the end I took it to a machinists place and they put it in the lathe and cut it out. They said it was still stuck until the last 1/2mm. I've did manage to...

Dont be put off by an EQ being too far away to check it out. Ask for a video of it running up and down. You can tell alot from just that. If it has had grease nipples put on then dont touch it. Like already said they run oil mist system. But then again EQ's can sometimes go for very little money...

I worked at chep (blue pallets) for 20 years, they do not treat any of their pallets, all they do is paint with water based paint. I've seen some blue pallets with HT, heat treated on them. The timber they use comes from latvia. Chep dont sell pallets, they just hire them so when you see stray...