Tony Works Wood's latest activity
Help Support UKworkshop.co.uk:
-
Tony Works Wood replied to the thread Restoring 18C longcase clock case.All those defects add character and tells a tale. It look brilliant as it is. -
Tony Works Wood replied to the thread Wadkin RU lathe restoration.I know the feeling. I'm doing the same. Not interested in full time production anymore. Just enjoy using the machines keeping them...
-
It’s nice to have the work to keep it busy but it’s also about the Wadkin itself. I hope to get going on my RU as therapy for a seven...
-
Tony Works Wood replied to the thread wadkin PK restoration.That hand screw Knob is paramount. You can't mistake a Wadkin Spindle Moulder split fence. Brilliant use as a substitute rip fence. Tony
-
more done, I'm pleased the motor was ok after spending 4 years outside. Bearings in good shape so just flushed and repacked. After...
-
Tony Works Wood replied to the thread Wadkin RU lathe restoration.Fantastic refurbishment. Have you enough work for it to be kept busy full time? Cheers Tony
-
The brass was a bit dinged up so I gave it a skim I've been removing masking tape and assembling bits all week. On some bits the...
-
Tony Works Wood replied to the thread Mystery - Bench top Table Saw parts.It is an aftermarket auxiliary fence, in layman's terms. If your sticking veneers on both sides of a panel they could be overhanging the...
-
-
Tony Works Wood replied to the thread SCM Super Router Refurbishment.That's a nice small one is it a pneumatic rise and fall head, I can't see a foot pedal? These are fantastic machines, underestimated...
-
-
Tony Works Wood replied to the thread Riving knife.Hi HPPS, I've got a 72 10" AGS also. Message me if you need any more info. My riving knife is different from the ones already posted...
-
-
Tony Works Wood replied to the thread Advice on table saw that is "quietish".You could buy a quiet saw but the blade might scream its head off. Check on quiet running blades as well.
-
Tony Works Wood replied to the thread What wood.I'll throw a spanner in the works. It could be African Mahogany or Luan, these are lighter in their natural colour. Both have been used...
-
Tony Works Wood replied to the thread Hello from Plymouth.Hi drobinson87, That planer thicknesser sounds cheap, If it's ok I'd snap it up it will save you hours of sanding. I've used this Makita...
-
-
Tony Works Wood replied to the thread Thinking of new Disc Sander.That Record Power DS300 will be a super machine, especially with a 1 HP motor. I've had a home made 12" disc sander, Picador aluminium...
-
-
Tony Works Wood replied to the thread Hello, from the Fens.Hi. You've taken up some good subjects on the CNC side. I haven't got any lol, still old school.
