Spectric's latest activity

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  • S
    Spectric replied to the thread Hall Effect.
    With large industrial motors there are sensors that are strapped to the motor which provide a reference speed to the motor control cabinet .
  • S
    Spectric replied to the thread Drill press (ATDP17F) tripping.
    If this machine was working ok and now after a period of time it trips the RCD it can only be damp or mice !! Give it a good...
  • S
    Spectric replied to the thread Drill press (ATDP17F) tripping.
    This sounds like there might be an insulation issue due to dampness in the motor which is causing an RCD to trip on imbalance due to an...
  • S
    Spectric replied to the thread Hall Effect.
    Why are you using a hall effect sensor ? there are many other types which work on various principles that you could use, optical...
  • S
    Spectric replied to the thread Computer confusion.....
    When you read to me alarm bells start ringing, just comes across as a money making scheme and read further If everyone uses the...
    • 1711630678129.png
    • 1711630899332.png
  • S
    Spectric replied to the thread Paint for kids toys..
    This is actually quiet ironic, we seem to have several generations that have all sorts of issues and conditions with headlines such as...
    • 1711622533518.png
  • S
    Spectric replied to the thread What lathe to buy.
    Have you looked at used machines, members sell on here and you can some good machines...
  • S
    Spectric replied to the thread Hall Effect.
    When comissioning the encoder in a system you set the "home position" which is given by the home / Index / Z output and then the A / B...
  • S
    Spectric replied to the thread Hall Effect.
    This all depends upon the accuracy of your speed requirements, for complete control and precision the sensor would need to be part of a...
  • S
    Spectric replied to the thread Home library.
    This might be an interesting read https://www.ukworkshop.co.uk/threads/shelf-supports.86342/ But you could use some of this...
  • S
    Spectric replied to the thread Computer confusion.....
    Having never heard of the site teachable I took a look and had no issues with accesing the site. It appears to be a platform for people...
  • S
    I think with some tools you can get away with that, angle grinders, drills and such could be consumables but would you want to cut some...
  • S
    Spectric replied to the thread Dewalt 1/4 router for Worktop.
    The limiting factor apart from the lack of power will be the plunge depth, a 1/2 inch router like the Dewalt 625 has 70 mm of plunge...
  • S
    Tread carefully, you can put the magnet into a blind hole routed from the backside so not visible from the front and a metal target in...
  • S
    Spectric replied to the thread Need to escape/reset.
    I would think that there are a large number of people who are struggling with a host of problems and it is not really there fault, I...
Back
Top