Sideways's latest activity

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  • S
    Sideways replied to the thread Hall Effect.
    24V (DC, yes ?) shouldn't disturb a pulsed signal from the hall sensor and the sensor pulses at probably under 12V won't disturb the 24V...
  • S
    Sideways replied to the thread "Indoors" Toolkit Thread.
    Your goto toolkit says a lot about what you do most :) This is mine in the maxpedition bag, plus the cordless driver that lives in the...
    • 20240328_210317.jpg
    • 20240328_211508.jpg
    • 20240328_210454.jpg
  • S
    Read this .... https://www.ukworkshop.co.uk/threads/scm-minimax-s45-bandsaw-teardown-overhaul.135069/ The S45 isn't designed to take...
  • S
    Sideways reacted to Inspector's post in the thread Elliptical Turning with Thanks Thanks.
    Welcome to the forum Moez. Don't put your personal information like email or phone numbers on forums. You can end up with a lot of junk...
  • S
    Sideways replied to the thread Hall Effect.
    The one in my photo is what's supplied with these £7 Chinese rpm display modules. Quite practical if you want to read, say, the rpm of a...
  • S
    Sideways replied to the thread Hall Effect.
    The hall effect sensor is a small device in the end of what is basically a threaded tube. Stick the tube through a hole and secure with...
    • 20240327_192657.jpg
  • S
    Sideways replied to the thread Hall Effect.
    I doubt north south matters for the sensor's purpose, but field strength will matter for getting a clear reading, and maybe more so as...
  • S
    Thank you very much! :ROFLMAO: I looked it up... yes, I do not need "knickers"... will edit if possible.
  • S
    Sideways replied to the thread Sedgwick CP bearings.
    I can't help with the CP bearings but they will be a standard bearing, readily available from Simplybearings or Bearingboys online. Pull...
  • S
    Sideways reacted to sneggysteve's post in the thread How to post an item for sale? with Thanks Thanks.
    See https://www.ukworkshop.co.uk/threads/for-sale-rules-guidelines-please-read-before-posting.54359/
  • S
    Do surgeons "knick" arteries ? :)
  • S
    I doubt there is any great difference between this and my 636, so I think the pulley will be an interference fit on the shaft. The...
  • S
    Sideways reacted to Noel's post in the thread It was 20 years ago today ! with Haha Haha.
    Scottish WW show 2004 at the SECC. Was mooching around the Axminster stand looking at a Jet jointer/planer. Youngish fella wanders over...
  • S
    Sideways replied to the thread 3M Versaflo alarms.
    If you run it with the filters completely removed, do the alarms stop ? And if you gradually restrict the flow by moving your hand...
  • S
    Sideways replied to the thread Pillar drill.
    :) At the time I couldn't answer that as I don't have any chucks smaller than 13mm and made a quick post using an old photo... But it...
Back
Top