Recent content by Shrubby

Often those saws have two mitre fences one either side of the blade with length stops . I've seen them used on non ferrous and plastics Matt

I posted earlier in this thread, a consortium of European manufacturers and IFW Stuttgart have been developing an infra red based system for a long time

Based on thousands of hours on Makita and Festo routers I would buy the Makita Rp1110C - it's the best 8mm-1/4" router I've used The Makita you like is going to have poor dust collection because the motor cooling air is blown directly down onto the cutter - this is a common failing of many of...

If you already have a bicuit joiner use that. Knapp verbinder makes lots of hardware for them and Lamello sell some too. theres a clamex S cam biscuit that uses an 8mm slot so you cut this by using the 4mm spacer that comes with the machine to make a double height slot matt

It,s a solution for Americans and the hobby fraternity that look in that direction. Someone mentioned a retrofit for panel saws in European education - I read of one being developed by IFA Stuttgart and a consortium of large manufacturers - it attached to the Suva guard and used near infra red...

Eugen Lutz sold his power tool business to B&D in 1984 to concentrate on bigger machinery aimed at window manufacturing (there are a lot of strange Elu routers for cutting in window fittings) the Swiss B&D Delemont works made lots of the tools and Perles and GMM made others. Bean counters at...

Hi Merlin, I'm familiar with these machines and might be able to help. They were called the WAP turboXL - WAP is now part of Nilfisk group, lots of tool companies sold them in their own brand colours so you can shop around Original Wap part No 14896 for Turbo XL series...

Death Star or a Crayola crayon - difficult to tell these days

Cuisenaire rods - you can still get them Matt

I would use a tiny bead of sealant the same colour as the wall. Soapy water causes adhesion problems - Fugi tools are supposed to be used dry to prevent this Watch the Fugen star youtube Matt

Rob, you could look for an old piece of furniture to cannibalize to replace the failed chipboard. I don't mean hack up an antique but an unloved C20th sideboard from junk shop could be ideal Matt

I have used my Makita biscuit jointer as a small plunge saw. It's explained in the manual - Lamello also show their machines used as saws Matt

Vollmer Matt

Hi Henning Sorry I've mixed up the numbers slightly. Your machine is 300mm wide - thats the ADH 1630 Not the ADH260 (260mm wide) you would probably have figured this out The letter after the machine number is W for single phase (wechselstrom) and D for three phase (drehstrom) electrics

Metabo bought the Emco designs. Your machine is a Metabo ADH260 if you want spare parts or a Manual download Matt