Recent content by SCMG001

Hello, looking for a good wood finishes book, thats really comprehensive. Ideally written and published in the UK. Thanks

Thanks , yes haven't considered acrylic or similar. Makes sense

Thinking about building a dado router jig. I like the idea of using angle aluminium, it seems as a good way to achieve a quick straight edge. Just wondering if this is a good way to go? Any recommendations of source , type and size. Starting with a 1/4 inch router

Looking to find a good reference book that provides good information about wood finishing .Ideally a UK author. Good to receive any recommendations? Thank you

Thanks, I was careful to put the nut back the same way , and I can try to shim with a metal washer. I will double check and get back with this and the difference of thickness with the saw blades. Interesting pint about the riving knife too.

Recently bought DWE7485-GB and really working well. I wanted to get a blade for cutting plywood finely, and (naively) purchased Dewalt 210mm x 30mm 60T FlexVolt Xtreme Runtime Saw Blade, thinking that this should be ok, as it is for the same saw, except battery operated. (mine is corded) ...

Recently bought DWE7485-GB and really working well. I wanted to get a blade for cutting plywood finely, and (naively) purchased Dewalt 210mm x 30mm 60T FlexVolt Xtreme Runtime Saw Blade, thinking that this should be ok, as it is for the same saw, except battery operated. (mine is corded) ...

Just picking up on this and considering using Spax Wirox, just wondering what size would be idel with using to fix and join 2 pieces of 4x2?

as a matter of interest, what was the set up? It seems quite a difference to what people are saying here compared to what you see on typically US YouTube videos.(although not confident that these are 100%) The concept sounds compelling, in many ways apart from being more expensive. I am thinking...

Yes, I will be doing this with some old rusty tools that i would like to renovate. But I will need to research further about soda blasting. I can see a few applications where I would use it for. But always good to heed advice and experience from others!

Colin, thank you for sharing your experience in such detail. This is what I love about these forums, its all about experience and helping navigate past mistakes and bad practises, but improving the way and how you can enjoy your hobby or necessary home improvements. I notice that your compressor...

Interested to know if anyone has pursued this route and used soda blasting for paint removal, wood and metal ? I have done some research and looks a viable option, its less abrasive, doesnt profile. I am thinking about external and internal window frames, removing rust from planes etc. Any...

Interested to hear if there are any good recomendations for a face shield thats impact effective. I would like to use this for when using a table saw, sometimes a grinder, and also planning to get a router? I havent seena post on this for a while, so may be some new products out and interested...

I am glad I read your post, as I was thinking about an Arlo, and have a BT complete wifi netwrk, which I think is mesh. Just been reviewing Reolink, and wanted to ask if you found any critical feedback you would like to share? Interested to know how effective the solar panel is too, if you have...