Recent content by Rigger68

Good evening Could you please advise where you purchased the 8 and 12mm collets for your Jet 34 spindle moulder ? Many Thanks Paul

Hi Johnnyr Just come across your post regarding the dado set for the makita MTL100 I was looking to somehow fit a dado blade to my Record Power rp250rs but unless you change the arbour to five eights then it can’t be done I have the same makita saw but didn’t think it capable of taking a dado...

Evening all I’ve bought a used RP tspp250 that’s working pretty good. I’m ordering an INCRA ts-ls fence system for it which should improve it Has anyone used a dado set on the record power table saw , if yes which brand did you go with ? I have a Freud blade in it at present that has a 30 hole...

Hi siggy I have bought a used RPts250rs that seemed to be in good working order , on further inspection there is an issue getting the blade out , when trying to undo the nut it’s spinning , when trying to tighten its spinning , I’m thinking the previous owner has stripped the threads inside the...

Hi Cammy I’ve purchased a used RPts250rs that looked to be in good condition, I made a few cuts and all was square etc. After it was delivered I decided to inspect the internal parts , I tried to remove the blade but the nut is slipping , it won’t undo or tighten Ive tried all sorts of methods...