Recent content by radicalwood

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. radicalwood

    Axminster ccts10 wireing

    Hi guys I does anyone have a wireing diagram for the switch of this saw. Took it apart but lost the paper with the wire info on :(. Looks like the idea carbon brushes have gone but thought it was the switch. Cheers Neil
  2. radicalwood

    bar skittles

    hi jumps, Correct its the table top version im after, I will have to try and scale from a photo
  3. radicalwood

    bar skittles

    Hi all, I have been asked to make a bar skittles game, I dont seem to be able to find any plans :oops: do any of you have some or any links to sites where I can get some. cheers Neil.
  4. radicalwood

    NU TOOL Thickness planer

    cheers for that I will give it a check
  5. radicalwood

    NU TOOL Thickness planer

    HI All, I have been given one of the above :) but it seems to have a 0.6mm taper across its width :? . I have removed the stainless plate from the bottom and am using the machined surface below it as the deck. have adjusted the infeed and out feed guide roller and but it still seems to taper...
  6. radicalwood

    Little & Large

    like them a lot, I feel a couple of rolling pins coming on for partner and daughter.
  7. radicalwood

    Walnut lidded form

    all I can say is wow and look on in awe.
  8. radicalwood

    a few bits for Christmas

    thanks for the comments, The wood on the jars is Olive Ash I got a length of 100 square x 2220 long from an auction 3 years ago, not had the courage to use it till now, paid about £25 for it. I have left the good bit on the rack :P for now as I do need to improve my hollowing and get...
  9. radicalwood

    a few bits for Christmas

    cheers for the comments guys, Wabbit I have to admit they are tool marks, its been back on the lathe since the picture for further sanding. The main block is Beech, turned on a ply face plate held on with double sided carpet tape spining at about 1450 rpm :twisted: :shock: was my first go at...
  10. radicalwood

    a few bits for Christmas

    Hi Guys, dont generally do much turning but I have been having a go at a few bits for Christmas. The lathe is an old Harrison Jubilee. well here goes. tea lights ear ring stand ginger jars larges 85 dia 150 tall mortar and pestle 150 x 120 block 120 high dish 10dia x 55 deep
  11. radicalwood

    jewellery chest of draws

    thanks for the comments, there were a lot of firsts for me in this job, so quite pleased with the result. OPJ :oops: yes there burn marks, the router cutter was not too good and a bit scared to clean it up too much in case I change the fit of the drawers. thinking it would make a good tool...
  12. radicalwood

    Ed's new toolbox

    do like that, I must do something for my gear, its just gets thrown in bags and tatty boxes.
  13. radicalwood

    jewellery chest of draws

    its been quite a while since I posted anything on the site, I finished this last night. carcase, back and draw fronts are Ash, draw side and runners are Beach. sixe 16" x 10" 10" finish is a gell (the name escapes me). Not many work in progesss shots sorry. thanks for looking Neil dry...
  14. radicalwood

    Brummie Bash-09.Sept 5th.

    Hi Paul. sorry going to have to miss it new date is first day of family holidays, shame was really looking forward to meeting a few people. Neil
  15. radicalwood

    Brummie Bash-09.Sept 5th.

    Hi Paul, will you count me in please, Live in Longbridge so not too far to go. any ideas on new dates? cheers Neil
Back
Top